Anyone familar with crack rack setups?. I have recently been thinking of building a “crack rack” in which I have several motherboards and CPUs running SETI which is loaded into memory. These extreme skeleton systems would only consist of board, CPU, RAM,...

Anyone familar with KDS?. Hello, Is anyone familiar with KDS monitors? I'm looking at a 22" KDS K-22B2W on Newegg.com for $189. According to the specs, it looks like a decent monitor, but for that price, I have to be a bit leery of the monitor's quality....

voice command software. Archived from groups: microsoft.public.pocketpc () anyone familar with ms voice command?. Archived from groups: microsoft.public.pocketpc () anyone familar with ms voice command? Archived from groups: microsoft.public.pocketpc () Yes....

RCA DLP. Archived from groups: alt.tv.tech.hdtv () Anyone Familar with the RCA 61" DLP models that can answer some questions or point to me some documentation on the service menu?. Archived from groups: alt.tv.tech.hdtv () Anyone Familar with the RCA 61"...

ping 192.168.0.32, the IP address of VLAN 10 on S2 and get replies. I cannot, however, get replies when I ping 192.168.1.1 or 192.168.1.2, which is VLAN 20 on S1 & S2, respectively. If anyone is familar with configuring VLANs using Layer 3 & Layer 2...

upgrade them, but after a restart, the benchmark was even lower; it was at 38mb/sec. I am really confused now about this. I am ready to install the 6.39 drivers again and just leave them and not upgrade to the 6.66. Is anyone familar with this problem?...

then reinstalling it, and that didn't help. I've removed several programs that I no longer use to free up memory, and that didn't help. Is anyone familar with this problem with this program? Thanx for any response and help Danny. Archived from groups:...

chip. Thanks again! Actually maybe Im mistaken. Should I be purchasing DDR2 1066Mhz memory in order to hit 4.0Ghz? What memory spread should I use to get it close to 1000Mhz? Anyone familar? Thanks again. Just me talking to myself some...

1080p but I can't even get it to the correct settings where it ouputs 1400 x 900 to my computer monitor and 1024 X 768 (best available res my card outputs that my tv can use) to my lcd tv. Anyone familar enough with nvidia settings to help me get this...

and leave nothing exposed. When I spliced into a wire, I used wire taps to make a clean splice. I'm told someone makes Breakers that plug into a fuse slot. That way you don't need to worry about carrying extra fuses. Anyone familar with these? Being the...