simultaneously on a PC, but they were both Logitech Dual Action controllers. However, I can see no reason why the Xbox 360 controllers should be any different. When you plug the second one in, Windows will assign it a controller number, and your game should...

have to have one controller plugged up and than a second one as well for l4d to recognize and assign one of the controllers as player two...i was mentioning my signature 64 bit os...XP 64 bit If you look at guides for generic controllers there may be something...

to which display, but you will also have problems wiff controllers. If you have a gaming mouse and key board you'll be able to assign the controller with that software. and the other mouse will use a standard driver. However I think you'll still have problems....

the deazones and calibrates itself accordingly. MC Archived from groups: alt.games.microsoft.flight-sim () As far as the rotaries and slider go check the sensitivity settings after you assign the control . IFRC they are defaulted to 0,had the same problems...

XP will assign a drive letter to it (let's say G: is assigned to it). Go to Control Panel and click on Administrative tools. Click on Computer Management. Click on Disk Management. Right click on the assigned drive of your flash drive (in our example...

it back once their blocked. I had a frend tried that, but kids were smart enough to figure it out. Using the router to assign and control it. Unless they come up with a utility to change the MAC address there is no way around it. Then if you want to give them...

running DxDiag, I can see that setting something as the Preferred Device assigns it Controller ID 0. But I also see that the order of the Controllers, as recognized by most games, is the same as the order listed in the game controller control panel,...

the XP controllers tree. I had to pull the plug and reinsert it. It might be a controller issue. I'm using simple directx and assigning in the sim. I noticed that when I pulled the plug and reinserted it, the settings I had assigned were still there....

the feature you want to control via MIDI. Activate Learn, hit the MIDI controller, and GR analyzes the incoming MIDI data and assigns it for you to the controller you selected. You don't have to set up Program and Controller changes or anything like that...