audio connections to digital receivers. Archived from groups: rec.audio.tech () I recently purchased a digital receiver and need help with the audio component connections. I need to connect a turntable (yes, I still listen to records), cassette deck (in/...

digital audio connections question. Archived from groups: rec.audio.tech () In the back of my receiver there are two audio inputs labeled DVD/LD In, one for coaxial and one for optical. Can I plug a separate component into each of these, like a digital...

Digital signal because DVDs have room for more soundtracks than laserdiscs and do not contain analog audio channels at all. For a couple of years audio equipment manufacturers were releasing Dolby Digital receivers with RF-demodulators built in, but as...

lines suffice." Archived from groups: rec.audio.tech () dotnw@hotmail.com writes: > I believe it does have a digital connection, because it is connected> via the digital coax connection *as well as* the left/right audio>connection. Not sure why it...

only way you can get any sound from a DVI to HDMI connection is to use the Optical TOSlink of the cable box to a Dolby Digital receiver with an optical connection. >>>>I suggest that the original poster get an HD set top box with DVI and >>connect...

component cable; the >audio is connected to the receiver using standard analog cables. The > DVD player also has digital coax out, but I haven't picked up a digital> coax cable yet. >> While watching a movie last night, I noticed that the audio was...

sub setup as the real high quality audio equipment like martin logans. I'm personally not an audiophile but I have rich American friends who are with the above mentioned Martin Logan equipment and other real high quality audio equipment and there is no replacement......

to connect digitally to your receiver, as it is a digital WPM receiver...on to the sound card. (2) Sound card For gaming needs, I would suggest the Bluegears X-mystique or Turtle Beach Montenegro. These both do real-time Dolby Digital encoding like...

of those wonderful home theater speakers. An analog connection to a receiver gives your PC the power (and potential quality) of a home theater speakers, but you still have the interference. A digital connection to a digital receiver gives you the best...

get a receiver, you should just do digital passthrough and avoid any soundcard processing. I can offer more "expensive" solutions, but when you do bitperfect digital passthrough, it means the soundcard has no functionality in sound stream besides just "passing...