Audio receiver questions. Archived from groups: alt.tv.tech.hdtv,alt.audio.equipment,alt.home-theater () Maybe someone has some insight into where I should look in my continuing search for a replacement for my old Pioneer audio receiver. I run the analog...

Dish 811 receiver questions. Archived from groups: alt.tv.tech.hdtv () Okay, I think I have my new setup figured out for HD *and* PiP. I'll have to upgrade the receiver to one with 3 component/digital inputs - no big deal. I'll also have to upgrade...

receiver. The receiver has no component inputs and seven S-video inputs. I use all seven S-video inputs. When I change from one input to another, the receiver switches the audio and the video in one step. Matthew Archived from groups: alt.tv.tech.hdtv...

desktop Audio system must: Play Dolby Digital Surround sound from digital SP/DIF in Switch via remote control to wireless headphones Components: Audio: Option 1: Any all in one receiver/speaker combination that supports SP/DIF...

but its nice to have) would more than make up the 100-200 dollar difference, and I'm not sure I would be much better off. I'm not looking to break the bank here. $600 is about my max. Some questions... Anyone have experience with Panasonic receivers/...

C Band Receiver Question. Archived from groups: alt.video.satellite.4dtv () Reactivating my big dish (perfect 10). GI 350 super receiver. Adding a sidecar. Suggestions as to manufactures. Dumb question but can a Star Choice GI Navigo receiver be of any use...

couple of years audio equipment manufacturers were releasing Dolby Digital receivers with RF-demodulators built in, but as the laserdisc market wound down soon this feature became much less common. The majority of audio receivers available today require...

A/V Receiver Question. Hey guys hows it going, im pretty new to the whole Home Theater thing and I have a couple basic questions as I am finaly on my quest to building a home theater. My main question is with the Audio / Video receiver. The componets...

get no audio at all, and if I check for audio subcarriers it will show that it's an AC3 audio signal. So the receiver apparently knows what AC3 IS (since it can tell you when it is present) but apparently it can't actually decode an AC3 audio signal? Or...

for the television's audio how is that > hooked up? > With the cable box I used the cable box audio out to the receivers> cable audio in. > How would the audio signal to a receiver be handled with the card? I run optical digital audio OUT from the TV...