MP3 background noise artifact. Archived from groups: comp.compression,rec.audio.tech,alt.video.divx,alt.video.dvd () Hi all, Recently I encoded some conversation to MP3 from AC3/DVD. In the AC3 source there was background noise: traffic, conversations,...

Timing. Archived from groups: rec.audio.high-end () Current audio systems do not reproduce the entire wavefront that creates the listener's experience in the concert hall. At best, they measure a few channels and reproduce those, inexactly, through a few...

but from my first look I'd buy the R7G over the CLD-99 if I didn't want to pay for the LD-S9. I will sometime have to compare the R7G to my X9. Again, this was a sharpness test and background noise was equal. ALL test were performed with DVNR and...

Wylie Williams > The Speaker and Stereo Store > Saint Louis, Missouri You could say that a competent design does not add unwanted audible artifacts, but that is subjective. Say that a competent design does not add any audible artifacts. That's getting...

of the noise or reduce the audibility of the artifacts. You can use white or pink noise at a suitable (!) level as noise example if it is not possible to find a usable example in the recording or in case the background noise is non-static, such as traffic...

divorce the > needs of a particular speaker or transducer from this and still come up with > anything useful to a consumer that I hope you are tring to "protect". Note that they are not saying that they will match the noise, distortion, interchannel...

like crap. It's like there is noise or grain or something, i honestly don't know too much about lcd's but i know this looks bad. In photo editing, forget about it, i cannot tell if the image I'm editing has noise/artifacts or if its just the screen. Also,...

which HDTV technology has the best quality standard TV pic... Archived from groups: alt.tv.tech.hdtv () Since it will be a while before HDTV telecasts become standard, I am looking for a technology (direct view, LCD rear projection or DLP rear projection)...

does that mean? >>Cut the audio track apart at several natural pauses and slip it back >into sync so that the error doesn't accumulate. > And fill those stretch marks with "room sound", the background noise you recorded when nobody was speaking. Mike...