Vista does not see my harddrive?. I have a Gigabyte 45P Motherboard and Samsung 750gb SATA Harddrive Links: In the BIOS my it recognizes the harddrive, when I try to install Vista Home Premium 64-Bit (Totally clean installation, the harddrive is...

to have A7N8X-X, didn't have a problem. The harddrive is old, the BIOs recognised the harddrive. Trying loading setup defaults.... It work! Why? I think the only thing that I have changed was FSB, cause the Bios recognised it as XP1100. And few other...

Gig HD and 512 Meg RDRAM running Windows XP Home. I recently added a 250 Gig Western Digital Harddrive partitioned into two equal sections. The new harddrive is recognized by Windows and the BIOS. Before the install I was running Roxio GoBack. After...

XP: X-Pain. I reformatted and updated to Windows XP Pro from Windows XP Home. It takes about fifteen minutes for it to load up and randomly fails to recognize my harddrive. It works fine when it's loaded. AMD Athlon XP 1600+ 512 megs of ram ATI Radeon 8500...

not recognizing harddrive. Archived from groups: microsoft.public.windowsxp.hardware () When doing a clean install of XP home, xp cannot find my harddrive. It is a SATA harddrive, with which I ran 98 fine, without any special utilities.. Archived from groups:...

it to recognize my 200 gb harddrive, any other simple methods? Archived from groups: microsoft.public.windowsxp.customize () First, does your BIOS recognize the 200Gb hard drive? If it's not recognized here then Windows can't see it either. Second,...

a data recovery place locally to > get a price estimate. I wish there was some way I could do it myself > though. Are you _positive_ that you installed the adapter correctly? Does your desktop's BIOS recognize the HD at all? -- Regards, James...

cable as someone above suggested. ANd by the way, I have two CD-ROMS controlled by the bios of my motherboard - no problem there. PI55T2P4 Pentium 166MHz. bios v4.51PG. So that's what I'm running. I would love to see more of each of the drives - I'm really...

Power Connecter 2 = SATA Interface Connecter 3 = Jumper Block So how do I set the jumper? Please help me! I have finally set the jumper but BIOS and Windows still don't recognize the HDD. So what should I do? Should I update the BIOS? Normally...