GA-EP45T-DS3R bios settings help. Here is what I have: GIGABYTE GA-EP45T-DS3R Intel Core 2 Duo E8400 Wolfdale 3.0GHz LGA 775 Patriot Viper II Sector 5 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 I currently have it set to 400mhz FSB x7.5 to get 3.0 ghz...

mysterious bios settings (m3a, bios rev. 1001). I was wondering what effect the bios settings have. i found out what PLL is last night. How about: 1. nb-sb link aspm 2. np nb-sb vc1 traffic support 3. isochronous flow-control mode 4. ht link tristate...

Bios program to update) and AMD Athlon II X2 245. 4GB (2x2GB) DDR2 800 and GeForce 8800GT 512MB. If needed, I can tell my bios settings... any help? Thanks! Anyone has any more ideas? Well unless you messed with BIOS, the only variable that can affect this...

Accidently hit some buttons in bios...lost all o/c settings. Any help to get my system back to 3.4ghz with ddr2 running at 850 any help with my bios settings would be greatly appreciated. BTW... YOUNGSTER? I've been here for years and have never been so...

You'll need to manually set the RAM to DDR3 1600 with 7-7-7-24 timings at 1.65v in the BIOS. All the settings for the RAM should be in the "Ai Tweaker" section of the BIOS. You'll see settings for DRAM frequency, DRAM timing control, and DRAM voltage there....

for what you do with the information in this guide. Overclock your hardware at your own risk. Overlocking Basics Before you start, read your motherboard manual. Know how to reset your BIOS in the event that you are too aggressive in your CPU settings...