Having installed the new fan and CPU, I booted up to make sure things were working. Things were okay. 2. Using 'ASUSUPDATE', I updated the BIOS using the file on the asus website 'AN801007.ZIP'. (But did not yet change any BIOS settings - the purpose of...

at this. I'm just looking for ideas on something I might have overlooked. The board will POST, and I am able to save BIOS settings without any issue. The problems arise when I go to shut the system down. Once it is down, it will not start up again until...

I keep the BIOS at absolute default settings, which sets the RAM to 1066mhz, the computer boots up fine. But when I change it to Profile1 in the XMP settings which brings it to 1600 with the correct timings and voltage, I save it to the BIOS and let it boot...

with checking the BIOS settings. I don't know how to do that, so if you answer is check those settings can you please run through how to do just that? Please help, having no music on my machine is absolute hell.. Archived from groups:...

O port resource setting for the parallel port in the BIOS for your computer. For information on how to change BIOS settings, please refer to the hardware documentation included by your computer manufacturer. MORE INFORMATION This error occurs in VGA...

BIOS and every update from the windows then i really don't understand why it shows tht i neither do any sort of over clocking as well everything is on Default settings please help me out how can i fix this issue wait for your reply [img][/img]. Hi Buddies...

ram,smps,on board bios jumper settings but and changed the cmos battery also but no change .i ask one of friend he told me once upgraude bios settings but i dont now how to do please help me sir . one of my system is not entering into bios even i tried...

on my keyboard for use after start up but no connection. And so I'm stuck with no OS properly installed and no way to change any settings. PLEASE HELP!! I know some technical stuff but I'm a 3D graphics artist and as you can see not the brightest in this area....

detecting drive please wait.. not able to enter Bios set up . Please help . my sytem is not booting and it hangs at "JMicron Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.69 detecting drive please wait.. not able to enter Bios set up . Please...

12.41's. I'd avoid the 21.81's, with your MX card, at this time. Be sure that the BIOS settings for your mainboard are correct, and check your jumper settings. Please refer to your mainboard manual for that information, or go to the manufacturer's website....