402 search results for bluescreens bios default
OK
Ad
  • Bluescreens on Bios default - Forum

    Bluescreens on Bios default. Hi everybody, I am trying now for days to find the right settings for my System. I am getting one bluescreen after another (on idle too) Even on Bios defaults or Optimized Settings my System is crashing. I have read a couple...

  • Battling the Bluescreen. BIOS novice. Help! - Forum

    My apologies. V2 bios is here: You got the latest. That's not the problem. Do what I said in my previous post. Load bios default again, go to power menu, set suspend to S3, save & exit. Run memtest for 5-8 passes. Allright :-) I updated my Bios...

  • GA EX58 UD3R forgetting harddisk boot order - Forum

    harddisk boot sequence - is it wrong when you go into the BIOS? Is this the boot sequence with "CD-ROM, USB, Harddrive, etc..." or the choice among the harddrives of which should be booted? After your suggestion, I have configured the BIOS to "Optimised Defaults"....

  • GA-X48T-DQ6 won´t run stable even on Bios defaults - Forum

    GA-X48T-DQ6 won´t run stable even on Bios defaults. Hi everybody, I am trying now for days to find the right settings for my System. I am getting one bluescreen after another (on idle too) Even on Bios defaults or Optimized Settings my System is crashing....

  • Stable 790i, Quad-SLI Config - does anyone have one? - Forum

    with some patience and RAM timings / voltage tweaks I was finally able to get it stable at stock settings with 2x9800GTX SLI. I was getting lots of blue screens initially because the BIOS by default did not provide enough voltage to the RAM (1.5V) These...

  • ASUS P5Q Deluxe Freezing - Forum

    updated the bios, and from reading online disabled C1E Support and enabled ACPI 2.0 but the system still locks. Everything is set to default in the bios and my CPU is running at stock . Has anyone got any surgestions before I send this board back to the supplier...

  • GA-Ma78Gm-S2h rev 1.1 system crashes - Forum

    BIOS default settings for the current submenus" (manual page 54, bottom) while on the main BIOS screen, and then an " Save all the changes and exit the BIOS Setup program". On reboot, re-enter the BIOS, and try the following: on "Advanced BIOS Features" page:...

  • Processor Install help?? - Forum

    a 256 nvidia graphics driver. can someone tell me the issue and how do i rectify it? thanks Power the pc up, tap a key printed on screen for BIOS/SETUP, load bios default, save & exit. If that doesn't work or non-existant: unplug power cord press...

Ad