Bridging the wireless and other connections. Archived from groups: microsoft.public.windows.networking.wireless () Hi Folks, need some help with bridging. My home network setup is the following: ADSL ASUS modem router IP 192.168.0.1 setup as a DHCP enabled...

This is just a general question regarding bridging wireless connections. I went out and picked up a WRT54G (I think that was the model) - The basic Wireless 802.11G wireless linksys router thinking that I would disable the DHCP portion, bridge the connection...

click the "ICS sharing" button on > the wireless connections properties then try to bridge that connection to > the bt connection, I get told that I must pick two connections to be bridged> that don't have ICS running on them. So I unclick ICS. Then if...

I've read where you can used a wired adapter and a "bridge." Can a wireless access point serve as a bridge? All of the wireless bridges I've found are kind of expensive, and I see that CompUSA has a Motorola WAP for a good price this week. Will this...

I've read where you can used a wired adapter and a "bridge." Can a wireless access point serve as a bridge? All of the wireless bridges I've found are kind of expensive, and I see that CompUSA has a Motorola WAP for a good price this week. Will this...

possible. 802.11 wireless is bridging by definition. No routing, IP addresses, or services (such as IPSec) involved. There's no other way to connect between wireless and wired devices other than bridging. Now, you could isolate the wired and wireless...

XP machine via an USB connection. This XP machine also has a D-Link DWL 520+ wireless adapter. I also have a Toshiba laptop XP (SP2) machine which I am trying to get to use a shared internet connection on the desktop. This laptop has an inbuilt wireless...

the Network Connections panel for the Wireless Network Connection and the local Area Connection and I had ensured that Internet Connection Sharing and Firewall were turned off for both connections. Any ideas on what is preventing bridging of the two...

and the fact that I would like to have wireless connectivity around 100 mbps, can anyone suggest a better replacement? Thank you again for all the help, Rich "I would like to have wireless connectivity around 100 mbps, can anyone suggest a better replacement?"...