Cant get router (DHCP) to allocate ip. Archived from groups: () just rebuilt my pc and i cant get the wireless card to acceept or obtain the ip from the router which acts as dhcp. all was working until i did a fresh in stall and my laptop is still working....

I cant print! I have tried giving the LinkSys print serve its own fixed IP and I have tried letting the router allocate one. If I connect directly (with wires) to the print server and allocate fixed IP to the PC and print server then I can print. In...

192.168.0.101 -- Router(dhcp server) -- Public IP -- Internet-- >> Public IP -- Router(dhcp server) -- 192.168.0.103 -- CPU2 >> I have an lmhosts file on each box and nbtstat -c shows connections on boths > sides. >> Am I just making this too...

it is best that you assign that XP Pro PC a static IP address on the LAN within the IP sub-net of the router, but outside the router's DHCP allocation pool. (This is to guarantee that (a) the LAN IP address of the XP Pro PC never changes, and (b) there...

these addresses allocated via the routers DHCP service. Is this a feasible scenario or am I losing the plot?. Archived from groups: alt.internet.wireless,uk.comp.home-networking,uk.telecom.broadband () I'm trying to configure the new DLink DSL-G604T router...

LAN uses a Netgear router/gateway so we are not using Microsoft Internet Connection Sharing, everything goes through the router whose IP address is different from the Office PC's network card IP address. I have the router configured to "Always Allow"...

a problem from my isp, my network is functional and my wireless card is functioning properly. I tried restarting my router and modem many times, with no success. I gave a bigger pool of addresses that the DHCP can allocate (from 8 to 100) with no difference....

router you have. > When I right click on the network icon by my clock, and click status, > I see Address Type: Assigned by DHCP, IP Adress: 192.168.x.xxx; > Subnet Mask: 255.255.xxx.x and Default Gateway: 192.168.x.x We can't advise properly if you...

configured static IP addresses, and do not rely on the DHCP service from the router (which might never return the same IP address every time). By default, the Linksys routers use a DHCP allocation pool of 192.168.1.100 to 192.168.1.149, so if you manually...

with wireless networks!! ICS works best if you allow it to allocate an IP address with DHCP. On the remote machine, take out the static IP and allow it to be allocated an IP address automatically. Also ensure that DHCP is disabled in the access point....