NIC card and Switch question. My office has a dedicated PC that act's as a server. The "server" has app's such as Office 2003 and Quickbooks that are accessed by 2 satellite PC's. The 2 satellite PC's are hardwired to a 1GBps Switch, (http://www.newegg.com/...

dimmer switch question. Archived from groups: rec.audio.pro () hello, can you take a light dimmer slider switch and place it in-line between the amp and speaker to lower the volume of that speaker when you want to? radio shack has a knob version that...

and is ignoring the auto command. >> So why does my server card switch to 100M full ? >> Luck perhaps? It does not sound like a situation upon which one > should rely. > So why does my server card switch to 100M full ? My thoughts too, I guess...

I have configured the stack of 4 with a stack card in the first switch (the base switch) connected to the other 3 via matrix cables. You can only stack up to 4 switches. I also have another stack of 4 switches. My question is the best way to join...

Switch Question. Archived from groups: comp.dcom.lans.ethernet () Hello, I have a hypothetical question with practical implications: Two computers, 'A' and 'B', are plugged into a 100baseTX switch. Computer 'A' has a 100baseTX interface and computer...

About to switch graphics cards.. Hey guys, I'm knew to this forum but it's been VERY helpful from google searches over the last year. Anyway onto the question. I'm just about to raid my mums computer because all her stuff inside is basically s***. BUT she...

PC's. I ended up going with economical (the TRENDnet TK-209K 2-Port USB Switch), which seems to be exactly what I need - until I ran into a problem hooking it up to my desktop. My monitor and video card both only support DVI connection and the KVM switch...

extreme II 4GB card and the card has a switch on the side that can change it from two 2GB banks or one 4 GB card, but if you change the switch, you can lose all data on the card. I inquired with tech support, and they gave me the run-around answering a...

the 2 monitors at the sametime with each PC, without haveing to move wires around when i want to switch between the PC and the Laptop. IS this possible to do with using 2 KVM switches? My other question is, do those $5 DVI-D Male to VGA female adapters...

connected to a 48 port D-Link managed switch (with two 1 GB port uplink) where 40 workstations are connected. I was ask for a project to increase the performance make use of the 2 uplink port to have a 2 gb uplink to the first D-Link switches. My question...