Case fans hooked directly to PSU?. After searching this forum and not finding anything that answers my question directly, I thought I'd ask about my specific question. I hope it's not too basic. My front case fans are 2 80mm coolermasters. Each one ends...

once I have my motherboard and can look at the specifications it needs for a case. I will not even ask about fans yet until I know what my Motherboard (MSI KT3 Ultra) will need. However, I do have one question, fans hook up directly up to the motherboard,...

E-machine t2542 case fan power connector location on motherboard. Hi, I have an e-machines t2542 that keeps sporatically freezing up, possible from overheating. It did not come with a rear case fan, so I picked up a new one that is the right size and shape...

1. You have a case fan mounted in the side, and it came with an optional fan speed control module, right? I expect you can simply not use that module and plug the fan 3-pin connector directly into the mobo SYS_FAN pinout. OR, you can insert the controller module...

incorrectly. How are the fans in the case implemented? A good setup will have 1-2 front fans (usually in the lower part) that intake cool air and 1 fan at the higher back part blowing hot air outside the case. Some cases have another fan out-taking hot...

sig of the week"... month... I mean year. "If I melt dry ice in a bathtub, can I take a bath without getting wet?" - Steven Wright Amd my 'My case has so many fans that it hoovers above the ground' and 'My watercooler contains so much water that the Moon...

extra fans hook up inside? Sounds like a good idea to have extra fans. Archived from groups: alt.sys.pc-clone.dell () Rob writes: >Mark, how do the extra fans hook up inside? Sounds like a good idea >to have extra fans. What I am doing is buying whats...

install the CPU fan, but my case fans have no 3 pins wire, and instead have only those regular 4 pins power connectors. Am I right in my assumption that because of that I can't hook them up to my MB (where I could monitor them), but instead have to hook them...

2 wire fan is run the fan at under 12v yourself, by making a harness that plugs into the stock fan and a normal mobo fan header on the other side (like a cpu or case fan). You can then hook it up to a zalman fanmate and run whatever rpm you want. I find that...

24/7 might shorten the length-per-application of thermal goop! :) Thanks for reply. Using a Coolmaster Hyper NS520 with dual 92mm fans, one of which blows directly over the NB heatsink. HS bolts on with four nuts, and is definately on tightly. I used a thin...