This causes a bad conflict. Leave the authentication (PPPoE) on the modem, and set the router to get an IP address automatically. On my old router, I couldn't change the entire IP address, just the last number. My solution was to get a new router....

changes, my router will not automatically update so name resolution fails on my computer. Then, I have to manually connect on the router and request it to request the new DNS addresses in order to solve the problem. But I would the router to do this automatically....

Change IP router automatically. Hello, I'm using a generic ADSL modem configured as a router for network access. Is there a way to make my router disconnect and reconnect in order to acquire a new IP address from my internet supplier in an automated way wohtout...

Hi Steve; Your router should change IP addresses with your ISP automatically. Check this link for more info. HTH; TomA "Stevef" wrote in message news:cIednQhPXZA1cyDdRVn-uA@comcast.com... > I discovered my D-Link DI-624 router does not automatically...

to change them manually in Windows XP in order for people to maintain access. Unlike doing everything with DHCP in the router....where the router would automatically keep everything in order. Hence my problem... In the router's web interface I must...

you tried to change the channel on your wireless router? Andy Yes, I've tried manually changing the channel on the router. I've also tried setting the router to automatically find the best channel. Neither one of these attempts fixed the problem. just...

automatic release/renew as an IP client of the ISP's DHCP server is not a supported feature. Do you know of any routers that do support this feature. Shouldn't we be asking for this feature from router vendors?? It should be industry standard. Archived...

obtain their IP addresses via the router's DHCP server (also the default). Keep in mind that wireless settings should only be changed using a wired connection to the router. Your cable modem will probably be found at 192.168.100.1 although you will...

your reply. I am running the Draytek Vigor 2600G wireless router on the desktop and the Vigor 540 wireless cardbus adapter on the laptop. I can confirm the laptop WLAN manager utility program has made contact with the router. SSID, WEP and channels...

my router do I need to have ports >>>>open? >>>>>Here is where I show my ignorance. If Tivo (wired conenction) is assigned >>an address on my router, does the router automatically open ports when >>needed or do I have to go into the router and leave...