Cheap system... (Abit NF7-M ?). Archived from groups: comp.sys.ibm.pc.hardware.chips () Does anyone have any experience with the subject motherboard, or the Nvidia integrated video in general? I haven't looked at the low end of the business for *years*, so...

PSU so got a Q-tec 550watt PSU (it was cheap). The system has been fine for months, but has started with the same problem again. If I disconnect the hard drives during the initial boot sequence, and then reconect them the system will complete the boot sequence...

with a Tbred B 2100+ at 100MHz fsb and it ran fine with vcore lowered to 1.50V, or maybe 1.40, don't recall. The PSU was only 250W. But i don't know why you don't want to replace the PSU as cheap as they are these days. -- Abit KT7-Raid (KT133) Tbred...

Intel P4 1.6A. Then overclock that thing to 2.13GHz and it'll be perfectly stable. An alternative would be the following (if you want a very cheap, pure intel system): ABit BD-7 256MB PC2100 P4 1.6A@2.4GHz Since the BD7 can lock the PCI/AGP bus, as...

at 1.4GHz, let alone anything over 1.4 (ummm... actually I haven't tried anything over 1.4 yet, to be honest.) However it is stable at 1.33 GHz (133 fsb, 10x multiplier, 1.75V core). My system: *Abit KT7A-RAID w/ BIOS version 7N, which supports up to...

Palominos overclock with cheap cooler and 1.85v? Now here's my overclocking experience with this CPU. I used a cheap alluminium based coolermaster HSF (no thermal pad/paste) which is fairly silent. Rest of the system: ABIT NF7 v2.0 2 x 256 MB Kingston...

to reach the the performance I want. I'm thinking of buying a 7600GS or GT but I don't know if the AGP versions are different from the PCI-E and if my CPU won't bottleneck my system. My system is: Abit AI7 (chipset 865) P4 2.8 ATI 9800 PRO 2GB Kingston...

60gb 7200 rpms HDD $100 Chieftec Medium Tower dragon case (different colors, aluminum, and has a window) $731 base cost Now, this, i'd DEFINATELY get the Corsair XMS and overclock it. Just use the stock heatsink for the Intel system. The Abit motherboard...

super performance, you can go with a simple 1Gig AMD or even less. If you want you can overclock them 100-200 MHz. My friend just built a Duron 700 system on the Abit KT7 RAID (the A7V is Asus and good as well). His $60 Duron kicks my bro's $200 P3 700....

Hyperthreading Optimization. My system: ABIT IC7-G 533/800 FSB P4 3.2G HT 512K 800FSB 2GB DDR400 PC3200 1-80GB Maxtor SATA 8MB 1-160GB Maxtor SATA 8MB Win 2K Pro SP4 I'm trying to coax some more performance out of my system, and was wondering if anyone...