their router if they try changing the router IP's >third octet to anything else but "1"? I tried changing my default IP from >192.168.1.1 to others but if I change the 3rd octet I can no longer access >the router and have to do a reset. I realize the first...

Cisco Router IP Reset?. Is there any way to reset the IP address on a Cisco 1900 through an Ethernet connection? I recently received one and can not seem to find the IP of the router. Any help would be greatly helpful. Thanks. Is there any way to reset the...

Juniper versus Cisco. Archived from groups: comp.dcom.lans.ethernet () I have some aging Cisco routers, and a very complex network. I'm wondering if anyone has experience with Juniper routers, and why one would pick Juniper versus Cisco?. Archived from groups:...

fixable by resetting my router, however my router is downstairs and in the middle of a Counter-Strike match it's rather annoying (to me and teammates) to drop, run downstairs, and run back up. If I don't reset it, then I can wait 10-15 minutes, and the connection...

do anything I want. vlans are fun... the question is.. Will your router handle the VLAN traffic. I know on Cisco switches/routers you have to set up trunk lines. I Havent seen a trunk option in normal broadband routers. My PC: Abit AX8 Socket 939 VIA...

he seems to be very knowledgeable. And i am stronger with Cisco routers. Best of luck. Thankyou for your help guys, firstly as you suggested vertual popeye Ive reset the router and changed the SSID from the default, after this I tried playing online...

don't have this problem. 3. If using other wired or wireless NICs on the same laptop, it works at home. 4. In the office LAN with Cisco router, the same laptop with the same wireless NIC, it also works. What have been done: 1. try to logon another user....

from or to any computer connected to that router. A router reset (reset button on the back) fixed it, temporarily. A week later the problem repeated. I replaced the router with a new one, figuring that it had an intermittent problem. All was fine...

Thanks for the help! with the modem handling the PPPoE authentication, set the router up for standard cable modem. (basically a hardware reset on router will set that up). then change anything regarding firewall and such on the router. yeah I tried setting...