Windows has stopped this device because it has reported problems. (Code 43). this is my Pen Drive KIngston Datatraveler 4GB. this is my Pen Drive KIngston Datatraveler 4GB Format it, with a USB pen drive tool. The pen drive may be bad and need replacement....

online, no one else seemed to have the problem, so I checked my device manager. Aha, one of the GPUs had an error. "Windows has stopped this device because it has reported problems. (Code 43)" Tried reinstalling the drivers, no change. Ran Mark3D Vantage,...

and discovered that the graphics card was listed with an exclamation mark. In preferences it said "Windows has stopped this device because it has reported problems. (Code 43)" I have used Inno3D support without any results. I've made a format C, Cleared...

crash, but after rebooting Windows would not recognize the card. Now I'm getting this error under device manager: Windows has stopped this device because it has reported problems. (Code 43) I've tried Driver Sweeper to completely remove old drivers...

The Serial Cable using IRDA protocol says: Windows has stopped this device because it has reported problems (Code 43), and the VIA Fast Infrared Controller says: this device cannot start(Code 10). I am trying to connect my Nokia 3200 with my laptop(ACER Travelmate...

Code 43 problem with sapphire 4870x2. I logged onto my comp a few days ago and the login screen was offset. when i booted windows this error came up: Windows has stopped this device because it has reported problems. (Code 43) also its only showing 1...

The only buddy I know that games around my town still runs the good ol' agp cards =(. I should add too that under device manager there is that little exclamation point and it gives me an error code of 43, Windows has stopped this device because it has reported...

1000w power supply and a Asus P5n-t mobo running Vista 64. When I look in the device manager it shows both cards, but there is an exclamation point over them, and it says, "Windows has stopped the device because it reported problems (error code 43). Any advice?...

to one of the cards and it states "Windows has stopped this device because it has reported problems (Code 43). When i click on check for solution, a windows message describes the problem as "Windows was able to successfully install device driver software, but...