in white, will it run in dual channel? yeah Depends on the board. MSI does it weird, other boards do it right. (each color is a channel.) Read the manual or try it both ways. CPUz should be able to tell you if your in dual channel or not. I shall do that....

these printers. 2. Don't confuse the ratio of colors in channel mixer with the shade of black (blue, purple or whatever cast) in the print. The color cast in the print is a result of the printer printing "profile". Worse, the color inks, when mixed to...

was 5MP or more. What I'd use it for is B&W digital photography. The three color channels have slightly different response curves, so I could mix the RAW data from the three channels...

Nikon encrypts white balance data - locks raw format. Archived from groups: rec.photo.digital.slr-systems () I wonder what genius thought this one up. Why does Nikon care? They are a camera company, not a software company - they give their raw converter...

thrown off with a color filter. As might other exposure tools: Apparently for example, Nikon's (and they are not alone) histogram is based on just the green channel - this won't work well if you filter out all the green light. Auto white balance may make...

Your points above are just right however, in essence, once a color>channel in R,G,B is at 255 on 255, then that's it, there is no more. You can increase saturation by decreasing the levels of the other color channels. -- Jeremy | jeremy@exit109.com...

incident reading. Most DSLRs will record up to at least 200% reflectance in the green channel, 320% reflectance in the blue channel, and 400% reflectance in the red channel, without pulling. Pulling by a stop halves those figures. >I can't see any...

be by boosting both the green and blue channel (or darkening the R channel). Blue would be by boosting the blue channel (or by darkening the R and G channels) Then recombine the channels and then desaturate the image. I have done this in Corel PhotoPaint...

RAW a cop-out?. Archived from groups: rec.photo.digital () I recently read a comment that suggested RAW was being used ineffeciently by people who never learned the craft of taking a good photo. How much truth in that?. Archived from groups: rec.photo.digital...

copy to CMYK mode, then use levels and curves on each color channel to modify the gamma/histogram of each, then use the channel mixer to make B&W images, then layer the CMYK and RGB reductions, perhaps with layer masks. I've never...