screen if the problem is the mother or video boards. Can it be the invertor ? Thanks in advance. Guillermo. Hello everybody, My compaq n800c seems to have lost 1 every 2 columns. This is independent of the screen resolution selected. The resolution...

you are not even getting to the first Windows XP startup screen then your problem is most likely a hardware issue rather than a problem with Windows. If your Compaq warranty is still in effect then you should contact them regarding this problem. Otherwise...

screen. >> I had this same problem on my DIL's 722US. After numerous fruitless > entreaties to Compaq to cover this matter under warranty, I found a set of > hinges on eBay and fixed them myself. >> This is such a common problem with Compaqs that they...

Compaq armada 7800 laptop. Archived from groups: comp.sys.laptops () my laptop wont boot, it gets stuck ant the compaq screen (it doesnt even make it to the windows screen). it gives me a message a couple of time(1782-disk controller failure)and then in...

and tried to make a bootable USB with a prog I found called UNetbootin. It seemed to write Ok so I plugged the USB into the Compaq but it just ignores it :o( I get the Compaq screen with F12 network prompt and then a 'check cable' alert where it cant see...

When I booted up the box, I saw the red Compaq logo and WinME Splash Screen. Then I got a 16 color 480x640 resolution generic Compaq background. The system booted, but there was no mouse pointer on the screen and moving the mouse did not highlight any...

show the black and white startup screens . . . only the big red COMPAQ screen, have tried pressing Ctrl, F2, and other possible keys while booting up with no luck. We have run Compaq's "diagnostic tests" and everything came out 100% passed. We are...

MY COMPAQ PRESARIO 2500 SERIES NOTEBOOK GETS HANGED ON COMPAQ SCREEN LOGO. MY COMPAQ PRESARIO 2500 SERIES NOTEBOOK GETS HANGED ON COMPAQ SCREEN LOGO, IF I PRESS F2 FOR SETUP IT ENTERS INTO SETUP BUT WORKING VERY SLOW AND THEN NOT BOOTING.. MY COMPAQ PRESARIO...

your BIOS reboot and as soon as the red COMPAQ screen appears > when you start your machine press F10, you may need to do this a couple > of times. >> You should get a message appear at the bottom of the COMPAQ screen> telling you that SETUP is starting....