Compaq W200 Wireless Lan and Odyssey HP Client Help Pls?. Archived from groups: alt.internet.wireless () Hi Just managed to get a brand new W200 WiFi adapter for my Compaq Evo N410C of ebay and it is working fine. However in addition to the driver software...

there is another CD called Odyssey Client for HP. This is also available from the N410C driver downloads page on Hp's site. So my question is what is this Odyssey Client. Do I need to install it over and above the basic client that is built into the driver,...

provide free wifi network in campus. by they use something call Odyssey Client, and reqiure people to use wireless adpter that support RADIUS, here is a list of cards that support by funk.com 3Com (11 Mbps Wireless LAN PC Card with XJACK® Antenna...

Problem with Odyssey Client scan lists. Archived from groups: alt.internet.wireless () My office uses the Odyssey Client for our corporate WLAN. To simplify things, I also use it at home. It works fine both places. I'm using it on Windows XP Home. However,...

the Wireless MAC Filter; then I could copy and paste the correct MAC from the access under the Wireless Client MAC List button. Under the "Wireless, Advanced Wireless Settings" tab, I left all fields with their "Default" values. Under the "Status, Router"...

wrote in message news:... > I ould like to use the cisco client utility and the orinoco one with > my client card which is DELL , >> will they work or do they only work with that brand of card ? We use Odyssey client from it's a third party client...

I would like to get a WAP that supports the older wifi client cards that aren't upgradable to WPA and as well support the newer wifi client cards that are WPA-able. If it isn't possible to have both WEP and WPA on the same WAP, do I just buy two WAPs?...

a wireless network in a corporate enviornment. WPA requires a RADIUS server for authentication, the wifi adapter must support WPA. Over summer did a wifi deployment using Funk Software Odyssey client software, RADIUS server and using Proxim AP's and DLink...

Wireless Zero Configuration Servoce fails to start. Archived from groups: microsoft.public.windows.networking.wireless () I have client machine which is a Compaq Evo N800v with the W200 wireless module. On reboot the Wireless Zero Configiration Service fials...

my new X50v. >> Is it possible to scan for wireless hotspots with the >Odyssey Client program? >> I double click on the wireless button on the X50v which > brings up my wireless abitity. Then I soft reset, open > the program, hit enable Odyssey....