7272 search results for compatible sata ports
OK
Ad
  • SATA 3.o compatible with SATA 1.5 ports? - Forum

    SATA 3.o compatible with SATA 1.5 ports?. Just what the title says. I'm running on an Socket A board and i need more storage. 450GB isn't enough, and i'm going to buy a 500GB SATA since both my IDE's are used up and i'm already using 1 of 2 SATA ports. I...

  • Adding second HDD to old machine with both PATA and SATA connections - Forum

    it as IDE Mode. Go down one line and Enable the on-board SATA ports. Now go down another line and set the SATA_0 port to Master (assuming you connected your new drive to the SATA_0 port). It seems your board enables its two SATA ports as if they were Master...

  • Sata & KD7 - Forum

    Sata& KD7. Does the ABIT KD-7 Raid motherboard have a SATA port or a port compatible with a sata adapter?. Does the ABIT KD-7 Raid motherboard have a SATA port or a port compatible with a sata adapter? It has no SATA ports and a AGP slot. It does not...

  • Asus p6t delux SAS question - Forum

    before I invest in a SSD. do you think the future ssds will be compatible with my current sata ports? I would be shocked if they weren't compatible. SATA II drives should be backwards compatible with SATA (I) ports. They would just have less available bandwidth...

  • "Hard Disk Error" on brand new system ...please help - Forum

    and plug the HDD into the same SATA ports on the mobo and SATA power cable and still nothing. I called WD and they said to call ASUS to see if their drive was compatible with the mobo, of course ASUS says their mobo is compatible with all SATA drives, etc......

  • 5000X Board (S2696) - Using Onboard RAID - Forum

    mode in the bios under the sata port option, i cant remember exactly where its at but there is an option to change from ehanced to compatible for the sata ports. and then try to load your raid drivers I had a very similar issue and luckily I found this website....

  • Bought a Computer with SATAII Drive....??? - Forum

    if it does not do it automatically for you. ATA drives also are known as IDE or PATA, and they are NOT compatible with SATA systems directly. However, most current computers have BOTH SATA ports and IDE ports on the mobo's so you can use both device types....

  • Unified Serial RAID Controllers for PCI Express - Forum

    has native multilane SFF-8087 SAS connectors or even individual SATA ports (using an octopus cable). As someone has already pointed out, it won't work at protocol level. SAS controllers are backwards compatible with SATA drives, owing to a legacy SATA...

  • Thecus N8800 NAS/SAN: Quick-Look - Reviews

    card in the proprietary motherboard enables eight SATA ports from the Marvell chips. Each drive gets its own port, rather than sharing throughput via a port multiplier on a mid-plane. Everything about the N8800’s construction exudes quality. The four 80mm...

  • Bios issue with Sata drive - Forum

    SATA II? If so, is the controller you have it plugged into SATA II as well? If it is only SATA I, does the drive have a jumper you can set to make it compatible with the SATA I controller? Some drives are backwards compatible automatically, some require you...

Ad