old Dell will not start. I made sure everything was plugged into the hard drive and motherboard. It all checks out good. Am missing something? Power to the CPU, CPU fan, 20 pin motherboard connector, and hard drive are all in place. The computer will boot...

Artifacting. So I've had this memory trouble for a while, it prevented my computer for booting up. So I switched the sticks and it's fine. I had to unseat the video card in order to take out the ram. Now when I boot up I get artifacts. I tried pushing it down...

Bad hard drive. I unfortunately my hard drive went bad and I need the information on it! I am starting to get the "metal grinding" sound and do not want to keep turning the computer to many more times. I can not get my main computer to boot up so I switched...

I noticed I was getting slow transfer speeds so did a little investigating. I noticed that every other time the computer boots, it switches to 100 Mbps network speed (as displayed in the Task Manager Networking tab). The transfer speeds are consistent with...

that it was not booting on my computer due to a bad sector on the drive (checkdisk found several and repaired them after which my computer boot issues began). My girlfriends computer gave the BSOD while it was idle, rebooted and entered the BSOD/reboot...

motherboard problem. hi i have an asus a7n266-vm motherboard with an amd duron 1300 cpu.the cpu heatsink and fan has stopped working. the computer boots up then switches off after a minute or so because of the cpu overheating, i bought a new heatsink and fan...

drive to my Presarion 7000US. The factory CD-RW drive was set to CS, so I set the DVD to CS also. The computer didn't boot. I switched the drives around, setting them master/slave. Still didn't boot. I then disconnect all the drives, and reconnected...

hangs from a cold boot and does nothing. Have you tried the other output port from a cold boot? Switched DVI ports and ran with it for a little. Ran from a cold boot a couple of times and here is what happened. 1st cold boot: Computer went through post...

to prevent it, as my whole family are on every newly purchased PCs. All my computer got z-times performance loss a month after the purchasing. A friend told me he no longer had the problem since he switched to iMac. But he is not sure it's because he has...