No POST after installing new 8800 GTX. Specs: Core 2 Duo CPU, Gigabyte ga-965p-ds3 MB, Silverstone Decathlon 750W PSU, 2 GiB RAM. After putting this all together, the computer is not POSTing. There's definitely a video signal, but the screen is blank. I...

achi driver. That, i could not understand, could be a the 32bit version of Ultimate im using. Now with ACHI, my computer boots with this achi detection thing and with it on in the BIOS it doesn't even detect the Burner and HD. When the computer POST, it goes...

neccesary hardware. But if the machine doesn't post, the first thing you are going to do is to pull out all un-neccessary. Thats why I always only install the neccesary, make the computer post and then install the rest. The only hardware you'll need to get...

No analog audio on hd5770. I recently installed a hd 5770 card on my HP pavilion computer. However, post installing I now cannot get any audio at all. In the control panel all my sound output devices are HDMI devices with 'moniter' icons instead of 'speaker'...

sentinel/safenet post install no network. Archived from groups: microsoft.public.windowsxp.work_remotely () Can anyone help me with these VPN clients. So far I've tried both of them and immediately after installing them, rebooting, I'm dead in the water...

find out what the average amount of memory is installed in THGC members computers. I have 768MB of PC1066 in my 'assembled by me' system. How much memory is installed in your computer? Also post what type of memory you are using. SDRAM, DDR, RDRAM? Also...

FINALLY install SP2 on my computer !!!!! With the many postings here complaining about difficulties in installing SP2, I thought I'd post one offering kudos for Mircosoft's help. I wish I had posted this earlier with April 15 arriving so shortly, the...

a 8 pin cpu ATX power connector. When I had nothing installed on the 8pin connector... the computer would not post even to bios. Since my power supply does not have a 8 pin power connector for the cpu... I installed the 4pin video power connector into...

you may have installed this hard disk into a computer that's old. it's not clear from your post at what point the error occurs, i'm not even sure that your bios can boot from the hdd (bios updates might help in this regard) Jasperjones has good points. Post...

First Post from a new system I setup!. Normally I wouldn't bother you guys with something like this, but this one's special enough I felt I'd share: I am posting this from on a install on a R5000 workstation I salvaged. Doing a serial terminal-based...