How to config a router. I have LinkSys DSL Router, directly connected to DSL modem. The problem is that i`m on dynamic IP and cant manualy set the IP, mask etc. in addition the default gateway is not directrly reachable, in other words if my modem IP is 222.34.54.56...

the router. I've tried to connect to it through I.E. using 192.168.0.1, , or the Netgear support CD link that came with the router. Every time, I get an error that the web page cannot be located. It's not practical to have to reset the router to the...

stuff like that. now, everthing was working great. the comp with the SBC stuff allready on it was working. but, when installed the SBC stuff on the gaming comp, both comps stoped conneting to the internet. i can't get to the screen to config my router. i have...

Manager for the first connection or not. Or I just use the router to call out the DSL modem. 2. if i use the router to call out what config on the router i have to do in order to make it work. if i possible could you tell me how the router is gonna call out...

Web GUI configuration solution. Thanks! -Lim- Why don't you get a 5 ports switch to sit inbetween your router and modem [MODEM] __Switch___ [Router] You can then feed another router off that switch, and config that router to have a different external IP,...

config the router to "spoof" the MAC address of your NIC. This way the router looks EXACTLY like your PC. Probably won't be necessary but available if needed. I'd go for the router without a second thought. My opinion of course. Good luck and happy gaming!...

the config. Look for NTP or SNTP client setup. >> If router #1 is getting its time from an NTP server correctly, it > might be possible for router 1. The client setup does not have a place where NTP server can...

files and printer" box but nothing appeared in the shared folder. Could there be some config. in the router itself that im missing?? "Frankster" wrote: > If you are already connecting to the Internet using the same router, simply > configure the...

on the router you will put in the IP address that your ISP gives you. This will be on the WAN side. Next pick a netork address to use for your LAN (e.g. 192.168.100.0) If you choose this then in the router config you would enter an IP address like 192.168.1.1...