board. In those it says ASRock board has plus point of CrossFire(x8,x8) and Asus board has Overclocking+Memory management. So i'm confused. Also, is my decision to upgrade from Asus M3N-H/HDMI to one of these boards worth ?? So, this Asus board is better...

Im Confused on Memory speed for the AM2+ CPU's. Right now im planning on building a computer-my first self built one! And I have the following planned out: CPU: AMD Phenom x4 940 3.0 GHz (150 on Newegg, and yes I know there are way better chips... I...

Confused about Ram Timing. Does the Ram timing really play into effect ? I ask because as Ram gets faster... the timing keeps getting worse. For example DDR400 has timing of 3-3-3 or 2.5-3-3 or 3-3-4 and so on DDR2-800 has timing of 5-5-5-18 or 4-4-4-12...

Confused] Wireless Router. Hi All Thanks for looking at my thread. With my 3yo Netgear WGT-624 dead, i am in the market for new router. However my situation is a bit complicated for me to make decision. my Network client is as : 1. Desktop PC with...

Confused about front panel connectors. Ok so I got a new case and when I took out my MOBO from the old CASE that the MOBO came with I forgot to look how it was hooked up with front panel i connected it like it says on Intel site but nothing........i even took...

Confused about my PSU. Hi Friends, I really need an opinion regarding my PSU. I have an MRON 700w PSU (approx: 30 US dollars) a normal one which comes along with the MRON atx cabinet. Now the issue is, my PC frequently freezes. It even happens when am...

Im a little confused. Ok so I built my computer and thought I had a decent rig. Specs are nvidia 9800 with 1 gig ddr3 running at pci-e 2.0 amd phenom x2 black edition 3.10 ghz 2 gig of 800mhz ddr2 ram ok so I run Crysis at 1680x1050 and i run it on...

Confused about frequency. I have a Kingston kit of 1GB sticks of PC2-5300 DDR2 RAM. Each slot says it's running at 333MHz according to CPU-Z. Shouldn't each stick of RAM be running at 667? Or am I supposed to naturally assume that it's really running double...

to adjust this and my cpu-Z now states: DRAMFrequency at 548.3 mhz, should this be correct? or is that per channel and I multiply that number by 2 to get my actual mhz and thus its actually running at almost 1100? I'm a bit confused from all the reading...

I'm really confused * It seems that ALL motherboards suck!. I've been doing lots of research reading what people have to say about different motherboards. I'm looking for one that is LGA 1366 to fit with the new Intel i7 920. I looked on new egg for ASUS,...