in it for 5.1 dolby digital sound output. If you were trying it with games...realize that not all games support 5.1 and uh, they output analog sound not digital. God i feel sorry for people trying to figure out all creative's control panels. Took me...

If I wish to go on line how do I connect the PC to my phone line to use dial up service.There is no phone jack on the PC. Also is there any way to connect the output from my digital camera to the PC? Again there is no UBS input port on the PC I am a total...

If it is a digital signal, try to add some dither to the signal, maybe that could help. "maxdm" wrote in message news:25150933.0410190415.773e8144@posting.google.com... > I've noticed that the further down you go with a digital fader > (attenuation)...

how to connect a RCA 3.5 mm output to a DIGITAL in on my r... Archived from groups: rec.audio.high-end () Hello all, I recently purchased a SONY viao rz54g PC. which has an RCA digtal 3.5 mm out jack. Now, I have checked, and I cant figure out which cable...

but i can NOT hear it through the SPDIF Output. when i connect headphones to the analog output, it works fine, but there is not Line-In output through the SPDIF. since i already have something else connected to my ANALOG speaker input, i cant connect...

may have... Set output in Windows Control Panel to "Speakers" and make sure its configured for 5.1. Using the "Digital Output" always produces 2.0 sound. (Drivers will handle weather Analog or Digital is the output signal). Thanks guys. @Rexter. When you...

through the rear speakers IN THE HEADPHONES ONLY. So I swapped the front and rear connections on the amp and the problem swapped from rear to front. I figured "must be the amp" because I have external Creative speakers connected to the Audio Out ports on...

Did you here? If you've got the money, definitely buy before midsummer, when the federal HDTV tax goes into effect. Officially, it's not a tax, just a mandate that starting July 1 half of all sets 36 inches and larger will have to include a digital...

end up repeating what I've already read in past posts: I realize that the SBLive needs to be set to Digital Output Only and I KNOW that the card is outputting the digital. If I connect a stereo 1/8 to stereo RCA and plug one of the RCAs into the digital...