Connecting network with dynamic DSL?. I have Earthlink DSL which requires I dial up first with Winpoet or RASPPPOE. My current network is set up so one computer must always on and logged onto to the DSL for the other computer to get on the internet. Is...

Windows 7 hard wired to the router @ 1gig. I have no problem connecting to the internet or the "Network" from any of the computers. I also have a network printer connected to the router. Prints etc from all locations. At Work I have 4 PC's hard wired...

would be easier and much safer to connect both routers to the firewall. For your new setup, you have to change the default gateway to Router1. Will Router1 be a DHCP or will you use static IP addresses on that network? If dynamic IP addresses, you'll have...

an unlimited number of potential protocols. For example, some > people IM by renaming files in a NETBIOS shared Windows partition. renaming files means nothing to packet inspection on the network. -- spam999free@rrohio.com remove 999 in order to...

in the registry for added security). Once you have the port forwarding setup, from outside your network you would try to connect to your networks WAN ip address. You'll find this in the router info pages. When a connection to the wan is initiated it will...

connect> to our office network via rj45 cable. We have a couple of laptops with > wireless that we want to be able to connect to the server without having to > plug them in. We are using MS Server 2003. I can't get the laptop to connect> to the network...

itself, put in a bogus zip code. A lifetime machine should be able to do manual records forever but I am not sure what else it is good for without a network connection. BTW I have thought about this too .. with a 45xx/5xxx. Buy a non-activated machine...

itself, put in a bogus zip code. A lifetime machine should be able to do manual records forever but I am not sure what else it is good for without a network connection. BTW I have thought about this too .. with a 45xx/5xxx. Buy a non-activated machine...

Poor signal strength after connecting to network. Archived from groups: microsoft.public.windows.networking.wireless () Recently set up home network with DLink Wireless router and 2 laptops with DLink cards. Not the smoothest transition to networking, but...

you need to change that. For XP, go to Network Connections run the wizard and add a new network connection (set it to get a dynamic IP from the "server"). And if you plan in never using dialup, disable the dialup connection. On IE, go to options,...