the connections on the sub woofer are for speaker wire input from the amp/reciever and outputs to the main front speakers. ________________________________________________ My plan is to add this sub to an existing setup that already had decent Front,...

manual will tell you if you can connect a sub and if so, how. A sub makes an amazing difference for both music and movies. If you don't want to invest a lot of money, Circuitcity sells Velodyne, which specializes in subs. When I got mine a number of years...

to try and full in the gap at the low frequency range. The sub woofer is 28Hz to 200Hz. I can't see anyway of disableing the BOSE bass speaker so that the Sub Woofer is used. I have a Surround 5.1 sound decoder in my DVD player and connected the player...

to solve compared to most issues that posters are dealing with: I'm in the middle of connecting my mostly new home theater system and cannot figure out how to connect the sub to the receiver. The Yamaha receiver (HTR-5760) has two jacks labelled "subwoofer"....

so high that the speakers and the sub are overlapping, will this harm the sound quality? Would connecting the sub to the B speaker outputs on the amp be any different(other than convenience) from connecting it inline with the A speaker outputs?. Archived...

audio jack-connected) pwoereed subwoofer, fed from the sub pre-out jack. I don't understand why this sub was sold to you as part of a home theater setup, since it appears not suitable for anything but a two-channel setup. How did you connect the sub...

i am having is when you say phono plugs do you mean 3.5mm mini jacks. if so then i can uderstand. i used to use and still have a set of videologic zxr-550's. each speaker connected to the sub/amp with an rca connector. the wires that connected the speakers...

causes for this error are:1) Remote connections might not be enabled at the remote computer.2) The maximum number of connections was exceeded at the remote computer.3) A network error occurred while establishing the connection." sub window_onload() if not LCase(...

Not possible unfortunately as all satellite are connected to the sub woofer first, then from sub woofer to the sound card. The sub woofer amplifies those satellite speakers so connecting them straight into the sound card (with 3.5mm instead of RCA) won't do....

subwoofer is designed to work ONLY with the Polk DS7200 preamp/processor. The 8" sub contains a 6-channel, 350W amplifier. I do NOT have the cable to connect this sub with the preamp/processor. It is heavy....39 lb. If you are interested, please e-mail...