Cooler Master Thermal Paste or Stock TP?. I've ordered a Mugen2 for the 1366 socket...I've heard great reviews about it. Should I use the paste that comes with it in a lil tube, or should I use my own Cooler Master thermal paste in a syringe? I know that...

Artic Silver 5 vs V8 Thermal Paste. If anybody has a Cooler Master V8, please help. I keep forgetting to ask but when I got my V8, it came with some kind of thermal paste inside the box with it, it says cooler master thermal compound on it, i never really...

the stock value is by raising the FSB. Other "Extreme" chips like the QX9650 or X6850 have “unlocked" multipliers; you can raise their multipliers above the stock value. These chips are denoted from the standard stock by the letter “X” in their model...

My current setup is: C2D E7500 Asus P5B-E Plus MSI N9600GT Kingston 5300 667 2gb RAM 3 x 12cm fans + 2 x 9cm fans Cooler Master 430W PSU Temp Software: Real Temp, SpeedFan I was previously using E4300 with Cooler Master Hyper TX and idle temps are...

to OCZ vendetta 2. 2. Installed 3 silverstone fans: 1 rear, 1 to replace the OCZ stock fan and 1 to blow the air across the RAM towards the intake side of the silverstone fan mounted on the OCZ cooler. 3. Used the OCZ Freeze Thermal paste 4. Turned off hyperthreading....

temp is about 28 degrees celsius. The case is from cooler master with to fans, on front and one back. My videocard has no problems regarding overheating. I cleaned of the paste that was on the stock cooler and thorougly cleaned it with alcohol. Then applied...

to install an aftermarket cooler, don't bother with the thermal paste. The stock HSF for the Intel cooler comes with it's own that works just fine until you overclock, and at that point you should be more concerned with getting a different cooler than what...

tempreatures. I have not loaded it yet but I assume it will go up to 50C right away. My only thought is that I replaced the cheap thermal paste on the stock cooler with Arctic Silver 5 which typically takes a while to deliver best cooling effects, but...

4850/4870: better temps by reapplying thermal paste?. If anyone has reapplied thermal paste while keeping the stock cooler, could you please share your results? thanks!. If anyone has reapplied thermal paste while keeping the stock cooler, could you please...