1GB ddr2 800 Mhz and 2GB ddr2 1066 Mhz. I put both on a 1066 Mhz motherboard and they run at 800. Is there a way to change that? To run at 1066?. I put both on a 1066 Mhz motherboard and they run at 800. Is there a way to change that? To run at 1066? by putting...

E6750 & 2GB Corsair DDR2 1066. Hey guys, I've had my computer for about 2 years now, but I've got to wondering if I am using my RAM to its capabilities. I have set my CPU to a bus speed of 400 MHz with a multiplier of 8 so its running at 3.2 GHz. I have...

DDR2 800 and DDR2 1066 doesn't have a noticeable difference in games/most apps and both can OC very well. Between DDR2 1066 and DDR2 800 both are good,if you are getting DDR2 1066 then get one with CL5 timings and if you go with DDR2 800 go for the one which...

working dual channel be faster than the 1333mhz cpu fsb?? I'm a little confused on all of that... I think 8 gigs of ddr2 800 would be more expensive than just buying 4 more gigs of the same ddr2 1066 I already have. Any help would be greatly appreciated....

RAM that Posts DDR2 1066 with no Bios Changes. Hi, I was just wondering if there was any ram that would just run at DDR2 1066 without adjusting timings. I purchased OCZ Reaper 1066, but I can't get it to post at 1066. I want just plug and play, no mucking...

DDR2 533 RAM in DDR2 1066 Mobo?. I've got a friend who's motherboard died and who is looking to buy a new mobo. He's currently looking at the ASUS M3A78-EM, which is a DDR 1066 motherboard. His current RAM is two 1GB sticks of Kingston DDR2 533. Is he likely...

DDR2 800 with DDR2 1066 Question. Hi - I wanted to know with the can I run DDR2 800 and DDR2 1600 at the same time? My cpu is the -- RAM links DDR2 1066 DDR2 800 What should I do to make sure I get the full benefit from the...

AMD AM3/ AM2+ CPU limitation, memory module DDR2 1066 or above speed is only supported by 1 dimm per channel." I was planning on getting this MOBO, along with OCZ 1066 DDR2 PC2 8500 memory. Given the note above, would DDR2 800 supported as dual channel, net...

700watt PSU AMD phenom 720 x3 core (2.8ghz) Gigabyte OC 4890 1GB DDR5 <- (latest drivers) Silicone Xpower 4GB 1066 DDR2 -2 channel Asus MX68 ---ddr2 1066 compatible MB--- <- (latest drivers) Problem: when running prevous 2gb of 800MHZ i can run overclock...

it says "Note: Due to AMD AM3/ AM2+ CPU limitation, DDR2 1066 or above speed is only supported by 1 dimm per channel." I got 8gbs (4X2GB) 1066 RAM. Since I got an AM3 Phenom II X4 processor am I understanding right that only 1 DIMM per channel will work...