- Related Search
- Seagate Barracuda
- upped the voltage
- DRAM Voltage
- By relevance
- By date |
- Sort :
-
Ram 6400 detect on board not 8500
- Forum
OCZ Platinum) The 2nd only use 1.8V and come up automatically in POST as 1066, with no changes to timing, freq or voltage. They are without a doubt, REAL 1066 modules. Unfortunately, they had lousy timings and I returned them. (Crucial/Micron) The 3rd...
-
BSOD with both sticks memory in
- Forum
so many people believe that DDR2 1066 MHz memory will make their system much faster than 800 MHz memory. the mobo needs to be compatible with the moduls yes, but the RAM should be able to run at 1066 on any compatible DDR2 mobo without a problem, I dealt its...
-
Can I Add More RAM?
- Forum
I have the G.Skill DDR2 1066 4GB (2x2GB) RAM modules. What I was wondering is whether I can add another 2GB of the same RAM to get it up to 6. Also, as a side question, am I able to add RAM of a different brand, as long as its still DDR2 1066? (Lets say...
-
GA-M61PME-S2P 800MHz to 1066MHz
- Forum
out at 1000MHz(2000MT/s). So it seems my motherboard is limiting me in more than one way. I just can't believe that it said DDR2 1066 on the Box and DDR2 1066 on the Motherboard itself yet it doesn't send more than 1.8V to the RAM and has no way of upping...
-
M4a78 motherboard memory question
- Forum
M4a78 motherboard memory question. i have a asus m4a78 plus mobo and phenom 9850 x4 proc and 2x 2gb sticks of ocz 1066 pc8500 memory. according to asus website and other sources * Due to AMD CPU limitation, DDR2 1066 is supported by AM2+/AM3 CPU for one...
-
Spending money to upgrade RAM, Video, or both?
- Forum
at the same time, upping the amount of ram may provide the best performance boost. Not sure if I'd worry too much with 1066. And if your motherboard auto overvolts it, could start upping the speed and may close the gap to 1066. If you do get more ram, then...
-
1066mhz 4GB ram upgrade from 800mhz help
- Forum
1066mhz 4GB ram upgrade from 800mhz help. hi guys, just upgraded from 800mhz 2GB (2 channel) to: 1066 mhz 4GB, (my mother says it can support DDR2 1066) After installing the ram i notice on the "post screen" it said DRAM clocking = 800 MHZ, so after a...
-
Should I get this i7 build or this Q9550 build need help.
- Forum
push pin £13.79 CASE : Antec Three Hundred Black Midi Tower Case w/o PSU £45.97 RAM : 2 X 4GB (2x2GB) Corsair TwinX DDR2 XMS2, PC2-8500 (1066), 240Pin, Non-ECC Unbuffered, CAS 5-5-5-15, EPP £98.07 GPU : 512MB Gigabyte HD 4350, PCI-E 2.0(x16),...
-
AMD Phenom II X4 955 Black Edition, Core 2 Quad Q6650, i7 920
- Forum
deals might change that a bit. 955 has both ddr2& ddr3 memory controller, 940 only has ddr2. ddr2 or ddr3 makes very nominal performance difference. OK than, so there are some difference in performance, so I'm buying a 955...ehhe..xP The multiplier's...
-
*Guide to Choosing Parts*
- Forum
this way for some time now. If you last built a machine in 2005, this may come as a shock, but it's true. Tom's Hardware now has this stickied in the CPU section. I recommend you read it. Overclocking And while we are at it, I think I'll say a bit...
