Raid 10(sometimes written as Raid 1+0). Raid 10 requires a minimum 4 drives, not 3. Use the Raid 10 array for the OS+Apps & Storage and then you can create a Raid 0 array for Media Cache & Scratch Disk. I can tell you from experience that Raid 10 is faster...

raid 0 and recreate it, and if so will it affect my raid 5 degraded? Because when I select delete, I get a warning that deleting the volume will reset the DISKS to non raid, and all data will be lost. If I can do the above how would I proceed with installion...

ENU Intel(R) RAID Technology Intel RAID Controller: Intel(R) ICH8R/ICH9R SATA RAID Controller Number of Serial ATA ports: 6 RAID Option ROM Version: 7.5.0.1017 Driver Version: 7.8.0.1012 RAID Plug-In Version: 7.8.0.1013 Language Resource Version...

had the RAID Volume as such: ID-0 Name - RAID0 Level - RAID0 (STRIPE) STRIP - 128kb Size - 931.5GB Status - FAILED Bootable - NO I've read several threads around here and elsewhere to perform the deletion of the RAID Volume and re-creating the...

RAID array. I am terrified of switching all the drives around. Even though I have my data backed up, I am worried about deleting my RAID array (which I assume I have to do to be able to plug the new system and DVD drives and have them recognised as 'normal'...

you turned RAID off? First thing I did was deleting raid 0 in Fast Builder utility (had to pres ctr + F) during boot up, then I changed SATA mode from RAID to AHCI so yes. Yes I'm using DVD with Vista, and can only see one HDD, also when I want to click next...

will not cause any data to be lost. 5. Software RAID vs. hardware RAID. Which is better ? For the most part deffinitely hardware RAID. However, software RAID has some few advantages, but its beyond the scope of this FAQ to discuss this further. For further...

on either IDE2 or 3, RAID is fine, DVD can't be found. I've tried downloading newer drivers, deleting RAID, IDE controllers in XP and rebooting etc all to no avail. I assume it should be possible to run a SATA DVD drive on the same controller as a RAID...

with using previously used drives in a RAID array? have you broken the stripe set and recreated? how do you shoot the devil in the back? what happens if you miss? -verbal Erm, I could try deleting the RAID array and re-creating it. Just to clarify I have...

But if he's going to break the RAID array ( now "0" ), he's eventually going to have to go into the RAID bios which appears after the Dell splash screen. He's going to have to delete the array, then recreate it for RAID 1 in the RAID bios..... I've...