back exactly in the original ports but I went ahead and switched the port 5 & 6 cables (the only ones that I could have gotten backwards) to see if that would work. No such luck. Now it would hang as it was detecting port 5 for about 30 seconds and I would...

that does the following: Performing a TCP Scan The TCP scan examines the 1,024 ports that are mainly reserved for TCP services, such as instant messaging services, to see if these ports are open to communication. Open ports can indicate a dangerous...

Canon i860 Printing/Print Head Question. Archived from groups: comp.periphs.printers () I'm print text and images for an art project in the highest resolution, that is, Photo PaperPro setting. Therefore text is printed as a composite black (using the three...

server recently and it detected port 21 as open and running an unknown (non-ftp) service. When I ran "netstat -aln" on the server, it didn't show anything listening on port 21. When I activated these 2 iptables rules and rescanned, port 21 was STILL...

will not backup my palm anymore through USB. USB joystick is not recongnized anymore. I can see the usb ports in windows, but cannot recognize my printer at the ports. I tried to reinstall drivers, uninstall drivers, change motherboard settings, etc. It...

which port the signal os comming in through. Just a minor thing that can be overlooked. Hi Folks, I have the a Dell U2410 which has a display port output - connected to the 5770 via the supplied display port cable. The other 2 LCDs are connected via...

Yep and confirmed by Asus. It does not matter. I have also learned that it the mobo is showing some of the ports as [Not Detected] because these ports are assigned to the two IDE ports which are empty. ...

can be connected to ports 1-4. I have not been able to confirm this yet. Does anyone have any experience with using the MN-150 as a hub? Archived from groups: microsoft.public.broadbandnet.hardware () The MN-150 has automatic detection if the port needs...

to me, but it turned out to be a faulty Firewire adapter card. Device Manager said the card was working correctly, but Device Manager will not detect that the ports are connected properly. Exchanging my card corrected the problem. There are several...

on your part does not constitute an emergency on my part." Here's the simplest possible fix I know. Go into your BIOS and disable all your USB ports. Then install XP (it SHOULD work). Once in XP, reboot, renable your USB, and XP will detect the ports and install...