- Content type
- Reviews (5)
- Forum (3801)
- News (1)
- Related Search
- disable the router
- netgear router
- DLINK router
- By relevance
- By date |
- Sort :
-
Can't connect to internet when I disable router
- Forum
to adjust so I can get online without a router? You might be wondering why on earth I would want to disconnect my router. Well, I play this game Tron 2.0 online, and the only way to host a server is to disable my router. And I used to be able to do this,...
-
Linksys BEFW11S4 wireless router and MN-730
- Forum
the same workgroup name. Also disable software firewalls and Windows ICF on the PC's since that blocks NetBIOS broadcasts. Initially don't use WEP (you may need to disable it on the router and wifi card). Once everything is working add WEP, using same WEP...
-
Complete VPN Fundamentals and VPN Router RV042
- Forum
step. WHEN AND HOW THE PREVIOUS STEPS are used or activated to create the VPN? 7. The router for NEtA has vpn passthrough. Is this correct? 8. The VPNrouter for NETB should it have vpn passthrough DISABLED? This router has VPN capabilities and...
-
FTP server through a router...
- Forum
Try port 20 too. ~ My System Specs ~ :wink: you need to disable block wan request. my computer is so fast, it completes an endless loop in less than 4 seconds! but also remember that if you disable that, your router will respond to pings. and if you...
-
Cable Modem -> hub -> 2 wireless routers Will this work?
- Forum
of the routers into an access point by: 1. Ignoring the WAN port 2. disabling the DHCP server. 3. Assigning an IP address to the LAN side of the access point that is NOT the same as the other router. For example, if the "g" router...
-
Router within school network
- Forum
what i tried to do was disable my router as a DHCP server, set the ip range within the LAN to 132.1.1.1 to 132.254.254.254, then assign my computer the address above by my router. this would not work because my router would not let me set taht ip range. im...
-
Sonicwall pro 200 netgear router and some confusion
- Forum
to prevent any outside attacks from seeing the router and possibly disabling it. Would it be suggested to go modem > firewall >router> switch? If so I'm assuming I would enable DHCP on the firewall and just disable it on the router, effectively making it...
-
Disable port 80 in Windows XP
- Forum
PC in question ...if I disable at router level, then ALL PC's cannot access the net, which is what I do not want. Thanks for your time and advice.. Can someone please provide a step-by-step guide as to how I can disable internet / email access from a computer...
-
modem/router + wireless router setup problem
- Forum
up the Wireless router ? with DHCP but wich IP ? Bob Archived from groups: () Hi Some of this Modem/Router combos have a menu entry that can disable the Router part and they can act as modems only. Other wise connect the Linksys by it self to a computer...
