98. The problem seems to be entirely on the side of the D-Link provided configuration utility. Your best bet is to keep going after D-Link for help with this particular problem. -- Alan Muller Software Design Engineer in Test Please do not send...

Help with Dlink NIC & security. Archived from groups: microsoft.public.windows.networking.wireless () When I try to enable any of the security features I get a message that the SSID is already configured and to enter a new SSID and network connection. When...

Help with Dlink NIC & Security. Archived from groups: alt.internet.wireless () When I try to enable any of the security features I get a message that the SSID is already configured and to enter a new SSID and network connection. When I do this it will...

for your help. hi I need help? I bought two antenna ant24-1800 d-link and 2 dwl-900ap+ one of them connect to a switch hub by utp and other to a ethernet in my pc by utp the range between two antenna 3km but I cant connect can you help me with configuration...

Why I can't see my D-Link DCS-2100+ from the Internet??? N... Archived from groups: alt.internet.wireless () Hello, I have: 1. LinkSys Wireless-B 2. D-Link DCS-2100+ Internet Camera a. http port = 85 b. control port = 5001 c. audio...

Contact DLink for the problem or / and email then for this issue On Thu, 01 Sep 2005 12:47:29 GMT, Chuck wrote: >I have a D-Link DI-624 wireless router. I have upgraded the firmware to >Ver. 2.70, but my problem was the same with earlier versions...

something else in the vpn server setup, client connection setup, or > some other obscure issue i have no idea about?? >> please help if you can. Archived from groups: microsoft.public.windowsxp.work_remotely () Firstly, thanx for your help. Gaaw Crickey...this...

My signal strengh signal varies quite often, usually between 50-65% and my tx rate is always at 11mbps. I called D-Link help desk and they couldn't really help me as usual. Does anyone has any suggestion to improve my tx rate and my signal strengh? I have...

The dlink doesnt seem to want to recognise the modem (motorola sb5101) or the presence of any WAN at all in the setup. I am connected to bigpond cable in Aust. ive followed the instructions on the dlink help The WAN light flashes I can connect to my housemates...

therefore point-to-point, > although the receiver could be any station in the net - while in the > infrastructure (hub) network, all stations transmit to the AP, which > retransmits to the receiver. Interesting. Thanks for the helpful answer! One...