Asus M2N68AM-SE2 does not POST. Hey all, I just received an Asus M2N68AM-SE2 motherboard, Phenom 9500 CPU, and 2 GB Dual channel DDR2 RAM. Upon connecting the 24 Pin power connector and 4 Pin power connector to the motherboard and hitting the power switch,...

New System Worked For 5 Days Before Failing - Does Not Post or Beep. I built a system last week and it worked perfectly for about 5 days. Then I noticed a high pitched whine. Following the sound to my system, I noticed it was quite warm. I shut it down,...

Motherboard does not POST. Trying to fix my system. Motherboard GIGABYTE P45-3UDL Intel Core 2 duo E8200 - XFX G9400 GT. Attached CPU , Graphic card and Ram. no POST. Motherboard turns on. I see two green light , one orange and one red ligts near CPU. Chasis...

Motherboard does not post but it boots!!!. THe problem is strange. I have a Asus m4n82 and the board does not post but it boots up fine. It is strange. I reset the bios but pulling battery out for 20 minutes and haveing the power cable out to be onn the safe...

Old Sytem build revisted, Does not post.. Hey guys, when I built my new computer, I used parts from my old system like the DVD Drive- but I had enough parts lying around for a whole new computer (provided I "stole" an old CD-ROM drive from my Old Pentium 3...

Powers on but does not post. Gigabyte P35-DS3R Intel Q6600 CPU OCZ 2x1GB DDR2 1066MHz XCLIO GREATPOWER X14S4P3 550W Power Supply MSI NX8800GT Video Card 10k RPM Raptor HDD 7200 RPM Western Digital HDD XP Pro 32-bit (non-pirated) The PC worked great...

Fans Run, No Post. Please help.. I have a serious problem with my computer. When I turn it on, the case fans power up, as do the HD and DVD Rom, The memory LED's Do not light up, and that's the extent of what the computer does. No post, no beeps, no error beeps....

ram voltage to 2.1v or specs, save & exit. If random no posts occur again, unplug power cord for 1 min, plug it back in, does it post instantly? Thank you. This little trick worked great as I can get into my bios again. System posts pretty fast now, but...

does not start (although it moves slightly when powering the machine on/off), all phase leds (which supposedly indicate CPU load) in mobo remain on, and system does not POST. There are no beeps or video. All case fans and graphics card fan start normally when...

of buying a new mobo) i would be so unbelievably happy. Thanks! Hi D See Tom's Motherboard FAQ. What about RAM stick(s)s in different slots? A system which turns on, but does not POST is either of the four parts not functioning or incompatible...