662 search results for dram ratio
OK
Ad
  • Need help with FSB:dRAM ratio - Forum

    is, how do I set the FSB:DRAM ratio in the BIOS? All I can do is select one of 667/800/AUTO in the DRAM frequency drop down menu. Don't see an option to specifically set the ratio. All the guides talk of setting FSB:DRAM ratio to 1:1. If I could do that...

  • My FSB:DRAM ratio = 1 Is that good??? - Forum

    My FSB:DRAM ratio = 1 Is that good???. My CPU is a Q8400 quad core MB intel DG41RQ. I have two memory module 2GB 800Mhz and 1GB 667Mhz I have both in placed and and both running at 667Mhz dual channel mode. My FSB:DRAM ratio = 1. Can I get a better result...

  • FSB:DRAM Ratio Locked? - Forum

    in both the FSB/DRAM ratio nor the DRAM frequency itself. Much help greatly appreciated! That suggests a paradox if neither the ratio or the DRAM frequency values have changed. Look for a reference frequency option where you found the DRAM frequency...

  • My FSB:DRAM Ratio - Forum

    My FSB:DRAM Ratio. I just got some free 2GB ram that's 800mhz and I have a T7300 processor with 800 FSB. What would my Optimal FSB:DRAM ratio be? Thanks. I just got some free 2GB ram that's 800mhz and I have a T7300 processor with 800 FSB. What would my Optimal...

  • DRAM Settings - Reviews

    FSB:DRAM ratio at 5:8 only required loosening its timings slightly. Meanwhile, the Core 2 Duo E6750's low 8x maximum CPU multiplier required a super high bus speed with a lower 2:3 FSB:DRAM ratio to maintain reasonably-short latency settings. ...

  • Is Pseudo-Sync the same as "asynchronous mode"? - Forum

    mode' topic=18694&st=0&#entry191509 or <extract from="AMD forum"> "On the other hand, if you want to keep the RAM frequency in 266Mhz (by SPD) or change to 333Mhz, you'll be forced to run in asynchronous mode (FSB:DRAM ratio= 4:6 or 4:5), " </extract...

  • Slow down RAM to achieve the ratio? - Forum

    Slow down RAM to achieve the ratio?. I've got an i7 860 @ 3.2Ghz (160Mhz, x20, QPI: 2560Mhz) and 4GB of DDR3 RAM @ 1600Mhz. CPU-Z says my FSB:DRAM ratio is 2:10 right now. If I slow down my RAM to 1333Mhz, will I maintain the same speed while putting less...

  • HOWTO: Overclock C2Q (Quads) and C2D (Duals) - Guide v1.6.1 - Forum

    just run the memory tests without first setting up your memory in your BIOS even though they might be auto configured. This usually entails the user to specify the timings, voltage, and fsb:dram divider prior to running the tests since the memory might be...

  • BIOS-issues for the Diamond - Forum

    menu Multistep OC booster disabled DOT control enabled CPU DOT step 1,2,3 1%, 3%, 5% Intel C-state tech disabled CPU FSB freq. 333 CPU Ratio 8 DRAM config. Auto FSB/DRAM ratio Auto Adjusted DRAM freq. 1333 ClockGen Tuner CPU amplitude control 800...

  • Help me overclock my Q9550 - Forum

    my FSB/DRAM ratio is set to 5:6. It seems like it's pegged to that ratio because even at my stock speed, all defaults in BIOS with a 333 FSB, I get a 400mhz DRAM speed in CPU-Z. When I OC to 400 FSB, I get a DRAM speed of 480mhz - too fast for my RAM I think....

Ad