No hard disk detected. I have an ASUS P6t Deluxe vs. I have loaded windows 7 etc. yet in the POST it says no hard drive detected. I have read diabling the jmicron contoller fixes this but I can't find this in the bios. Guess this doesn't cause any problems...

time I boot up, it says "hard drive not detected" However, the hard drive shows up in BIOS (Samsung sinpoin...). I can boot up into the hard drive if I have a vista OS DVD in the DVD drive. It says "hard drive not detected" then goes into "do you want...

De appears on during boot but not on my computer. whats wrong?. I have a sata as primary and I just put in an ide WD 160gig drive. I took the white sqare thing from the back off and the HDD is detected during boot but when everything is loaded I don't see...

time I boot up, it says "hard drive not detected" However, the hard drive shows up in BIOS (Samsung sinpoin...). I can boot up into the hard drive if I have a vista OS DVD in the DVD drive. It says "hard drive not detected" then goes into "do you want...

How to update bios on Striker II NSE. When I boot up my striker II, it says it doesn't detect my CPU and after another screen it says no drives detected. but I can boot up windows, and run everything else just fine. I think I may have to update the bios...

as its voltages drift out of spec or fail altogether. Your mobo supports SATA drives; you can find one at a site like newegg.com for $60-$90 depending on capacity. If you've lost or never had a SATA cable, be aware that OEM drives (vs. Retail) won't come...

from groups: alt.windows98,alt.sys.pc-clone.compaq () The drive is set for cable select. The old drive seems to have "finished dying" - when it is detected on boot up, I not only get the message that the disk failure is imminent, but I also get a message...

jock488" wrote: >the pc wont boot up at all. it searches for primary master and slave drives>and none are detected, and it only boots up so far using the windows xp cd. >it asks for the recovery floppy (automaed recovery disk). i havent made an >automated...

drive was correctly detected and the boot order was OK. - Entered the Recovery Console, and did CHKDSK, FIXBOOT and FIXMBR. - Copied NTLDR and NTDETECT.COM from the CD to C:\ and ensured the BOOT.INI file looked good. - Mounted the drive into another PC,...

Windows 2000 CD, go to and download the 3-or-4 diskette set needed to boot and install Windows 2000 starting with a floppy. But first, check the boot order in the BIOS. If CD-ROM drive is first in the list of boot devices, the Windows 2000 CD should boot...