in dual channel. I ran the benchmarks and it turns out my scores are exactly the same! they are all within 1 fps (or less than 3%) from my single channel scores listed at bottom. To me this made no sense. How could it be that double the RAM in dual channel...

Help Needed. ThankYou. What is the difference between DDR3 Dual Channel and DDR3 Triple Channel? Can my Intel i7 860 Support DDR3 Triple Channel? Help Needed. ThankYou you can use tripple channel memory with the 860 but it will default to dual channel...

its good business or not will be seen soon. I know buying gpus, most people know theyll have a short time at the top. From what Ive read, i5 has everything i7 does pertaining ro destop, other than the already mentioned pci capacity, and tri channel, which...

and have no troubles. RAM running in single channel isn't going to help matters. If you're running 2 RAM chips make sure they're put into the correct slots to enable dual channel. If they are then you're probably not running a matched pair (forum: is this still...

running at 167.4Mhz My motherboard supports dual channel memory, but I think it's fsb is at 200Mhz and I don't know if it worth it to go dual channel. Any suggestions on that? Things that I do involve 3d renderings(solid works, 3dmax) , multi tasking (photoshop/...

have trouble supplying the correct modules! Therefore, only DDR so far, with Dual Channel, can help, and in case number 2, it can't if 800MHZ FSB is chosen. So I doubt we'll hear of it any soon, possibly after H1 04. EDIT: I just checked the Inquirer...

am still getting the checksum error message Can anyone help me? I flashed the bios, everything went smoothly, but I still need to use f1 to rest Gateway tech support useless Check your messages :) Renegade warrior, thanks for your help!!! If anyone...

If it helps, I have 1gbs stick in the two yellow slots A1 and B1. try 1 yellow and 1 black, that board apparently has had mem issues 4 a minute, run it at 800mhz, make sure its in dual channel Manually set both the timings and voltage in the bios. ...

out a bit ahead. That's because a 754 3200+ is 2.2ghz w/512k cache, and a 939 3200+ is 2.0ghz w/512k cache. Dual channel helps, but not enough to overcome the 200mhz clock difference. If you compare actual clock speeds, a 754 3200+(2.2g/512k) and a 939...

Are Biased topic. It's true RDRAM has no advantage, just a clock speed show off, plus a 2byte bandwidth, needed Dual Channeled to help. DDR coulda really helped the P4 in first place. Not only that, the Prescott is scheduled to have 800MHZ FSB (if it still...