Triple Channel Problem [HELP]. I have 8 GB geIL ram installed onto my computer yet only 4GB is detected. I do have windows 7 64bit <--- info also i think the problem is that is shows its dual channel on CPU-Z i dont know how to change it to trip i've...

DIMMS of 256mb pc-2100 of different manufacturers and wanted to do the DUAL channel mode. CPUZ read that it was still in single channel mode, so I bought 2 brand new sticks of MUSKIN 256MB DDR pc-3200, installed them and it displayed as dual channel running...

i know my ram is dual channel, also in the DRAM Frequency it only shows 400 MHz. The Voltage 4 my RAM reads 1.8V, i think i have to bump it up too 2.2V, can any1 help me with this please? P.P.S how do i get CPU-Z to read Dual channel instead of single?. Hello...

channel) Bass runs from head, direct out to board (1 channel) Violin runs into processor, direct out to board (1 channel) Cello runs from pickup -> DI, direct out to board (1 channel) Keys run -> DI, direct to board (2 channels) That gives us 12 channels...

channels, I do not believe one of those ICs is the problem. any other ideas?!! >> yesterday the old amplifier was working fine. today, it lights up in >> front...it gets hot... but no sound is output. neither channel. problem is >> not my phonograph...

Slacking??. So just for the record you have the following XP2600+ fsb = 166 dual channel memory 2 x 256 Corsair 1002 bios You are able to run dual channel memory and a 166 fsb or better? The solution may be obvious, but I can't see it for the smoke...

per channel only, means that you can't do a dual channel. A good mobo AM2+/AM3 is the MSI K9A2 Platinum, I have one and a X4 955 with 6GB 800MHz....also support 1066MHz in dual channel and 8GB max. Well If you want to use the RAM you have go with the M4A78,...

and I could some edumakated opinions please. I just went through a partial rebuild of my main comp, with the new components being: Asus M3N78 Pro Motherboard GeForce 8300 chipset AMD Athlon X2 6000 2gb DDR2 running Dual Channel Problem is a new graphics...

Dual channel memory problem. My brand new custom built pc specs Intel core 2 quad q8200 Gigabyte ep45 ds3p bios f8 650w psu i green power 1TB HDD 2x2048mb 800 mhz corsair memory ( problem) 1024 mb corsair ram When i connect the 2 dual channel memory...

at JEDEC specs. There's no way to run triple channel memories in dual channel mobos! How did you get them to fit in the first place :??: Huh? You realize that when you put an odd number of ram sticks into a dual channel board it just runs in single channel...