dual sat receiver but only single cable run to sat receiver. Archived from groups: alt.video.ptv.tivo () Is there a way to "combine" 2 sat feeds over a single coaxial cable? I only have a single cable run to sat receiver and would like to take advantage of...

dual sat receiver but only single cable run to sat receiver. Archived from groups: alt.video.ptv.tivo () Is there a way to "combine" 2 sat feeds over a single coaxial cable? I only have a single cable run to sat receiver and would like to take advantage of...

you can have a single cable from the receiver to the TV and no need know what input to use on the TV for the various sources. This receiver is about $799 in the stores and about $550 online. I believe that there is another Yamaha model slightly cheaper...

receiver and TIVO >recorder) or do you still need your DirecTV receiver in line? >>2. Dual tuner recording.. my dish has the 3 LNB's. But the problem would >be getting second line to the receiver. How many of you have used the dual>recording option?...

all the way from receiver to your tv. HDMI is the exact same thing except, the sound is included with the single cable as the video cable. HDMI is the future of digital electronics and dvi is the almost recent past. IF you use dvi you still have to use...

nominal). >> A single receiver can use a single LNB, and switch the LNB between > LHCP and RHCP signals as it wishes, depending on which transponder > it wants to receive. >> You can't put two receivers (or tuners) on a single cable to a single> LNB,...

nominal). >> A single receiver can use a single LNB, and switch the LNB between > LHCP and RHCP signals as it wishes, depending on which transponder > it wants to receive. >> You can't put two receivers (or tuners) on a single cable to a single> LNB,...

a single cable. You then need a dual-output "de-stacker" to feed the two tuners on your receiver/recorder from a single cable. The cost is nontrivial - figure around $100 for the stacker and $100 for a dual de-stacker, speaking very roughly. Some buildings...

a single cable. You then need a dual-output "de-stacker" to feed the two tuners on your receiver/recorder from a single cable. The cost is nontrivial - figure around $100 for the stacker and $100 for a dual de-stacker, speaking very roughly. Some buildings...

What type of receiver do you have ? >> If you have a Fortec Lifetime, I could tell you how I compensate for the > 3.5 degree skew using USALS. This is the only FTA receiver that I have > ever used and I don't know about other receivers so I won't go into...