single ethernet port. Is there a way to have both connections at the same time (ethernet bridge to the w-lan and the connection to the LAN hub)? Until now I am switching the two cables manually, Many thanks.. How can I "duplicate" an ethernet port on my...

Trying to do this as lesse expensive as possible. Your help will be appreciated. Related Pr oduct Register or Do you have a modem? Look at the back of it. Are there any duplicate Ethernet ports? Some modems have built-in routers that can hook up to...

back I don't really care though. >I have no special attachment to the serial number or MAC. If they are running out of good "hot spares" that is reasonable but I am still not convinced there isn't a way to zap the flash ROM via the ethernet port. The...

back I don't really care though. >I have no special attachment to the serial number or MAC. If they are running out of good "hot spares" that is reasonable but I am still not convinced there isn't a way to zap the flash ROM via the ethernet port. The...

The orange cable was terminated at both ends with 50 ohm (nominal) N connector terminators. ISTR that a tap in 10base5 was capacitive. It was just a little antenna poked thru the coax shield. Google for "ethernet blue book dec intel xerox". You might...

Anyone used Iperf or Netperf w/GigE?. Archived from groups: comp.dcom.lans.ethernet () Hi, I was wondering if anyone has used Iperf or Netperf for testing network performance over GigE? The reason for my question is that I've been doing some testing,...

have to maintain local copies, video's may work better if you copy them locally before playing them... you'd need to experiment to find out. Directly connected in your context likely means that the nas is plugged directly into the PC's ethernet port... which...

LAN (WLAN) # 10/100Base-T Ethernet port # 56K V.90 modem # 4 USB 2.0 ports # 1 FireWire (IEEE 1394) port # 1 S-video out port # 1 notebook expansion port 3 # 5-in-1 memory card reader: reads SD, MMC, Memory Stick, Memory Stick Pro and xD-Picture Card...

as it is deemed "unsecure" I am assuming that the ethernet ports worked when you jack directly in with a PC? If not, your network ports are likely disabled and need to be activated by your campus network team. Use a switch; hubs are a piece of junk...granted,...

the internal Ethernet port. In Network Connections, I right clicked the Ethernet wired LAN connection and clicked "Disable." Then I rebooted. Sixth, I uninstalled the Linksys "Wireless-G" card from both PCMCIA ports. I did this for PCMCIA slot #1 by...