you can get that information from the router. Also, check the ISPs website or contact them. >And I can't run my PC as a rtv server, since it's not on all the time - >the rtv is. >>Ideas?? My router (Linksys) doesn't support permanently assigned...

you can get that information from the router. Also, check the ISPs website or contact them. >And I can't run my PC as a rtv server, since it's not on all the time - >the rtv is. >>Ideas?? My router (Linksys) doesn't support permanently assigned...

D-Link 604 Router. Archived from groups: comp.security.firewalls () I have just recently installed a new D-Link 604 VPN NAT Router, and I have stealthed Ports 113, 137, & 138. I am also running Trend Micro's Firewall. I have checked everything on GRC.com...

setup is like the problem described. For example, my computer is behind my NAT linksys router which assigns me a IP using DHCP. At my company, the windows 2003 server is behind a symantec router. The server has a fixed IP. We only use L2PT. However,...

remote site issue) the following commands: router#show controllers cable-modem 0 mac errors and router#show controllers cable-modem 0 mac log This might provide some information that either you (if it is DHCP error) or Charter if it is a frequency...

back in and now use my DI-634M and this issue is no longer present with the same computers. I would also occasionally get your computer does not have permission to access this resource errors with the router. On a side note never use the router with wpa...

Help!! Webcam Novice Trying to Setup Security Web Cam. Archived from groups: alt.comp.periphs.webcam () Greetings Group I want to setup my webcam with a streaming feed through my personal web site. While I'm at work I will then navigate to my web site...

have checked the network configuration, checked the Windows Firewall settings, which are set to allow RDC, I have even disabled it and my AntiVirus software but still get the error. I do not have a router on my system, I am going thru a DSL modem with...

to have the same problem with the dns server error. It may be the router because only wireless g routers give me the problem. I have used a pre n router and it seems to work better. If u try it and it makes a difference let me know. I was having similar problems...

operation has timed-out" error. I'm no great wiz so I have to follow the manual and instructions in the Help file (yes, I do read them occasionally ;) but still no luck. - Could you please check if I have made some config error? The router: - Persistant...