ethernet connection problems with a 5040 ..... Archived from groups: alt.video.ptv.replaytv () what a nightmare trying to get this up and running ....1st the blaster took so long to get going {but I finally tackled that problem !}now...the ethernet connection...

ethernet connection problems with a 5040 ..... Archived from groups: alt.video.ptv.replaytv () what a nightmare trying to get this up and running ....1st the blaster took so long to get going {but I finally tackled that problem !}now...the ethernet connection...

the ethernet connection too. I have noticed on an eMachines desktop PC, that the LED on the NIC still blinked even though the PC was unlugged while an ethernet cable was plugged in. I can't explain that one either. From:Mark Lloyd mlloyd@5xxxmail.com5xxx...

the ethernet connection too. I have noticed on an eMachines desktop PC, that the LED on the NIC still blinked even though the PC was unlugged while an ethernet cable was plugged in. I can't explain that one either. From:Mark Lloyd mlloyd@5xxxmail.com5xxx...

it all hooked up >correctly cause I checked it so many times ???,but it's working now ! > Some problems are like that, they go away mysteriously. Hope it doesn't come back. >but there is definitely a problem with the Ethernet connection>though....whenever...

it all hooked up >correctly cause I checked it so many times ???,but it's working now ! > Some problems are like that, they go away mysteriously. Hope it doesn't come back. >but there is definitely a problem with the Ethernet connection>though....whenever...

Did PPPoE break my network to 5040?. Archived from groups: alt.video.ptv.replaytv () My DSL ISP converted to PPPoE a month ago which somehow broke my Wireless bridge network connection I had for my 5040. It was working fine prior to that. When I select...

Did PPPoE break my network to 5040?. Archived from groups: alt.video.ptv.replaytv () My DSL ISP converted to PPPoE a month ago which somehow broke my Wireless bridge network connection I had for my 5040. It was working fine prior to that. When I select...

an ethernet connection from the computer to the RTV. You can do that either with a cross-over cable directly from the computer to the RTV, or with to regular cables connected to a hub or a switch. You cannot "fool" any device to think that it is on a...

numbers. It is dialing, but not establishing a connection. It does do it if I connect ethernet - thats how I did the first update - but no joy via dial up. Yes, I am trying to avoid ethernet connection as it would require running lots of cable - and drilling...