through LiveVoIP. I run into problems when I try to use the menus with devices which only generate inband DTMF. The simple problem is kphone. Using its G.711 codec and setting "dtmfmode=inband" results in this. Oct 30 16:47:53 WARNING[1149348784]: dsp.c:...

build 1095" for peer 2001 -- Executing Dial("SIP/2000-1a06", "SIP/2001|20") in new stack -- Called 2001 -- SIP/2001-205a is ringing Oct 14 13:26:39 WARNING[6150]: chan_sip.c:681 retrans_pkt: Maximum retries excee ded on call 43458-D1B9-11C3-5BED-DD74319D5BB9...

Event Viewer showing lots of errors/warnings... please help!. Hi everyone, I checked event viewer recently and I'm getting all sorts of strange errors. can anyone help me decipher and fix them? Here they are: WARNING: Event 0, AtBroker The description...

and no help . I do not download from websites except for > neccessary pc updating . The pc otherwise runs superb . Thank You . I think you'll find it's explorer.exe crashing. What to do about it? Well, not a lot really but there's a solution if you...

postin', my fingers are swollen, Rawhide! That's not exactly true. Win2K and WinXP fully support the FAT32 file-system format. NT 4.0 can't interpret FAT32 drives without a third-party add-on's help, and under no circumstances can NT 4.0 boot from a FAT32-formatted...

eventvwr.msc -- or Go to Control Panel / Performance and Maintenance/Administrative Tools >Event Viewer. Review the sections and look for Errors or Warnings that match the time the event occurred. Double click---the information "may" give a clue....

as 7-7-7-16 at 1066MHz instead of 8-8-8-24 at 1600MHz. I just ran Speccy and it's showing 7-7-7-19 at 533MHz(???). I'm not sure how to set this to 8-8-8-24 at 1600MHz. Any help would be greatly appreciated.. I recently built a new system with a GA-P55-UD3...

on a dedicated web server. See the link below on using the Security Configuration and Analysis tool. There is a lot of information for secedit in the Windows built in help or using secedit /?. --- Steve "Mary S" wrote in message ...

even with the new firewall, it just happened alot later than straight away. There is a shitload of errors and warnings in the event viewer, DCOM, Service control error, and system error, in the system section. There are also many errors in the application...

system's Event Log: >> Select Start button/ select Run , then type in >>>> eventvwr.msc >> -- or Go to Control Panel / Performance and >> Maintenance/Administrative Tools >Event Viewer. >>>> Review the sections and look for Errors or Warnings...