XP Failed Again!!. Archived from groups: microsoft.public.windowsme.general () Sigh!! Long story short, Willy ran into the same problems with XP on a second hard drive that I did with the upgrade. It was up for 20 minutes and then crashed repeatedly....

fifteen seconds or more, then tried again, the task would not run. If I tried again within five seconds of that attempt, the tasks run fine. If I again waited more than a few seconds, the attempt failed again. See the log below. As you can see, the first...

warning. So, I used my dell diagnostics diskette which boots to DOS. The RAM test failed at address 000004E0. I have two RAM sticks, so I swapped them and ran the diagnostics again. The RAM test failed again at the same address! What conclusions can...

Dish HDTV in a Box set up in January 2004. A few days ago, while watching a program, the TV failed, same as if it were unplugged from AC power. I assume the power supply failed. I hear that the RCA set this is based on has a high incidence of power supply...

Version check failed?. Archived from groups: alt.games.starsiege.tribes () Windows XP ZoneAlarm set on learning mode. Hardware firewall disabled. Version check failed Your version (0.25034.0.0) of Tribes 2 is out of date, but there are no updates...

Failed hard drive; RAID 1. I have an older Dell XPS-410 with Raid 1. This morning when I booted up I was greeted by the message, "A RAID volume is degraded because of failed hard drives.". I kind of saw this coming. I'm now running on the other hard drive...

it was my Ram. So I ran HCI Design Memtest on win7 for about 8 hours only to find out it failed at about 4 hours. I ran it again and it failed again. Now I ran memtest for stick one for 17 hours, and stick 2 for 11 hours, and they both passed with no...

Laptop just failed, how to backup Outlook, calendar, mail, folders ect. so my inspiron 1520 hd failed again due to a badly made factory image AGAIN and i just lost os functionality. I had been backing up all my stuff, so thats not the problem... the problem...

because the Amek 4091 IC's in the meter driver section >failed. I managed to locate the replacement chips (at great expense!) >but I wondered if anyone had any experience with this situation. My >concern is that my rare and expensive 4091 IC's may fail again.......

It claims to have installed successfully. Loading Vista now comes to the screen with the green bars moving left to right and they go once smoothly and then stop/jump for as longas I have let it go (~15mins.) Repair install failed again. Windows.old folder...