meant for it. This is my idea, if someone can give a more knowledgeable response, or idea, is welcome to post it. my reply there wont be any fan connected to the board, i intend to use that fan header soley for the usb. Also i am wanting to connect...

someone can give a more knowledgeable response, or idea, is welcome to post it. there wont be any fan connected to the board, i intend to use that fan header soley for the usb. Also i am wanting to connect the usb ports that come with a motherboard (usually...

This place rocks for info. First build. NZXT Tempest(Airflow King)Case, 6 fans. Asus M3a78-em motherboard with 3 fan headers marked pwr fan , cha fan, cpu fan (obvious). Does it really matter which 2 of my six fans go into the pwr and cha fan headers? The other...

KT7-RAID fan header. On the ABit KT7-RAID would it be safe it hook up a GlobelWin FOP38 to one of the fan headers on the motherboard? Or should I connect it to the power supply (it came with a connector).. On the ABit KT7-RAID would it be safe it hook up a...

and I'm always short of the females that plug into the MOBO headers - now I know how to 'double up' when restocking :) Arctic says any fan header is good for five of 'em, and I think that's pretty conservative - here's something I hunted down for a post at...

case fan. 4. Chassis Fan Header No. 2 - Connect to middle case fan 5. Chassis Fan Header No. 3 - Connect to bottom front case fan 6. Optional Fan Header No. 1 - Connect to ganged two rear case fans w/ thermal sensor located on CPU Heatsink. 7....

anyway. Is that correct? That motherboard, like most of them I've seen, doesn't have 3 system fan headers. It is listed as having one 4pin and one 3pin. If I plug one of the 3pin fans on the CM690 into a 3pin header, would that fan have its speed...

power connector 3. 1 x floppy disk drive connector 4. 1 x IDE connector 5. 8 x SATA 3Gb/s connectors 6. 1 x CPU fan header 7. 2 x system fan headers 8. 1 x power fan header 9. 1 x front panel header 10. 1 x front panel audio header...

it is (one fan with a regular motherboard fan header and the other in the cpu fan header). I have my Thermalright Ultra120 eXtreme-1366 RT CPU Cooler set-up in the Push/Pull configuration using a Y-splitter cable connected to the CPU Fan mobo connection and...

PSU: Thermaltake Toughpower 750W DVD: LG 22x DVD RW With the exception of the CPU fan header, the M/B has two other fan headers, but I will have the two inbuilt fans (top and rear) and 3 additional fans (two front, one side). I am looking for advice on...