file i believe, where can I find that? Latest BIOS is 1001: It is a BIN file. Make sure you have your USB drive installed before you reboot into the BIOS. Also within the BIOS you need to make sure removable devices are enabled as boot devices. And I...

latter time, What setting in the bios should i use to set ram timings ? should i set it to just run 1333 to i am ready to OC ? 3. Any bios setting to tweek before installing the OC Any help would be grate :) 1. 2. That RAM should run...

put in a ASUS P4C 800 E deluxe in my last system. Sure I can use a usb keboard but if I need to get to the bios, I have to use the ps2 slot or I cant get my key board to work either. I have the latest bios and can't find anywhere where in the bios where I...

to run my SUN 21" monitor) A little bit of knowledge is a dangerous thing! Well, I got the latest 4 in 1 drivers. The latest bios for my motherboard (Just flashed with newest version). all updates from microsoft windowsupdate. got the latest video drivers...

and we had a few now and again. If you find out to late that you have on you just keep quite and treat each case individualy and and ask questions like are you sure you loaded the latest BIOS or Yes but you assebled your own machine and we did not Spec this...

am still getting the checksum error message Can anyone help me? I flashed the bios, everything went smoothly, but I still need to use f1 to rest Gateway tech support useless Check your messages :) Renegade warrior, thanks for your help!!! If anyone...

Tbirds are notorious for heat. Most of the the KT133 motherboards needed a BIOS update at some point before they could even run the old Tbird 1100's (200) and up. Find the latest BIOS for your motherboard and flash your board. 56K, slow and steady...

SP2 - need to update BIOS?. Archived from groups: alt.sys.pc-clone.dell () Dell recommends updating to the latest BIOS before installing SP2. But I sure hate to mess with the BIOS unless there's a very good reason. Is this really necessary, if everything...

then we can go into your bios to adjust. You may find that the defult settings for our motherboard are Ok for you. If anything seems like its running too hot then I can help you figure out what settings in the bios you may need to adjust. good luck....