card, wich seemed pretty common. Anyway, looks good so far. The thing is while I was trying to find the problem with the PAGE_FAULT_IN_NON_PAGED_AREA and IRQL_NOT_LESS_OR_EQUAL, I used CPU-Z to check my RAM. The frequencies and other numbers don't seem right......

with various drivers, almost all Windows OS from xp onwards... its the same thing) today, however i tried a new solution to it... I reduced the FSB of my CPU in the BIOS from 1333 to 1066 ... and put the RAM and CPU frequencies from [AUTO] to [LINKED] ... i've...

you checked the timings, frequency, and voltage of the RAM in the BIOS to ensure the settings are accurate? Intel LGA 775 boards do not benefit from faster RAM frequencies. At least for troubleshooting you should run your RAM 1:1 with the FSB. In this case...

maybe they don't know yet or most possible they don't want to tell me). I think and I am almost sure that Win 98 SE can't work with CPU's running with high frequencies. I put an 1,2Ghz Athlon to work at 1,466Mhz. The following error occured: "Invalid system...

becomes 64+128=192mb. But I'm afraid if the frequencies(66MHz or 100MHz) of both the RAMs dont match, what will be the result??? In such a case, how does one understand that the RAMs frequencies are not mathcing??? How to detect the frequencies of the...

receiver that I am trying to use for FTA but whenever I program the frequencies from Lyngsat.com I cannot get any Channels. I have only been able to get 3 Arabic channels on T5 at the following frequencies that was programmed in the receiver when I bought...

Interpretation of Lyngsat info (for Ku frequencies). Archived from groups: alt.video.satellite.mpeg-dvb () For a given satellite, under the heading "Video Encryption", if it states "DVB", does that mean that it is FTA and can be viewed using a mpeg2 dvb...

of frequencies tunable on a FTA receiver is generally 950-1450mhz. Again 500mhz bandwidth. So if you want to look at one of the network affiliates on the Ku side transmitted at 11.800ghz...... Take the transmitted frequency and subtract 10.750ghz(LO frequency)...

cband frequencies. Archived from groups: alt.video.satellite.4dtv () I'm trying to find a chart showing, on a cband receiver, what frequencies it's receiving for the various Ku band channels, 1-32. I've found a couple different sources of information, and...

Ku frequencies on a DSR 922. Archived from groups: alt.video.satellite.4dtv () Since there is no channels standard for Ku satellites is there a way to determine what frequencies are being tuned? I see the 922's "channels" and can slide the frequency + or...