Gigabit Ethernet PCI card. I would like to use one of my machines as a NAS server on my home network, but the onboard Ethernet is 100/10, not Gigabit. The machine only has one PCIE slot and thats occupied by the graphics card. There are gigabit ethernet...

Getting Checksum Errors on Gigabit Ethernet Cards. Archived from groups: comp.dcom.lans.ethernet () About 18 months ago we upgraded all of our key servers to use fiber optic gigabit ethernet cards. We went with Compaq NC6136 cards attached to an Extreme...

read that you can use a Realtek driver to run it on Windows Server 2003. I got the card to work but it won't connect at Gigabit speeds, nor do Jumbo frames work. Its useless. Does anyone know of a Gigabit Ethernet card that supports Windows Server 2003,...

Mini PCIe gigabit network card?. I am looking for a way to get a second gigabit ethernet NIC into my new Mac Mini. I know the mini PCIe slot for the wireless card is just a 1x but that would be perfect for a network card. Ideally it would be able to be paired...

as above, although it may have more support in upgrading? Possibly even going wireless but again not sure if the 360 can support wireless draft -n? So, what's the best gigabit ethernet card for my upgrade (Dell 5150) and if necessary for any other wired...

the image from the server. We have 48 port gigabit switches throughout the distict. The 6-7MB/sec is obviously on a 10/100Mb ethernet card. I haven't tested gigabit speeds yet. My System: And what 24port/Gigabit switch would you suggest for a Netcafe/...

what could be causing the slowdown? Here's my setup: Linksys EG1032 V2 gigabit ethernet cards, plugged in 32-bit 32mhz PCI. One in each PC. Linksys Instant Gigabit ethernet switch (EG005W) Both computers should be plenty fast enough, one is an...

all, new to the forum here! I have a question relating to Gigabit Ethernet, but I might as well tell my situation: I have a small home server that I keep in my room, and have recently installed a Gigabit Ethernet card to have greater speeds. (I run...

the card didn't come out of the box supporting Vista but there was a driver you could download for vista support (RTL8169/8110 Family PCI Gigabit Ethernet Nic). I've tried multiple times saving the driver onto a flash drive from my dad's computer and then running...

3 gigabit ethernet card (and that is with a 2.1 Ghz CPU). Go invest in a mother board with PCI 66Mhz or 100Mhz bus, preferably with 64-bit wide PCI connectors. ALso invest in Intel 1000 ST cards. These are server cards with wide PCI bus. Then repeat...